Factory TCS taken apart need help

[syndicate]

I was cleaning my throttle body today and removed the TCS throttle solenoid from the throttle body housing. It kinda popped apart and I did not see the exact alignment of the two gears inside. I put it back together and immediately the check engine light and TCS light illuminate. Car seems to idle fine maybe a slightly bit higher but all seems normal. There was nothing helpful in the manual about this hear alignment. Is there anyone who knows about this that can help?

Thanks
Jay

 

[arista5]

Jay, I never took one of those apart but i am also thinking you mean the TPS Solenoid? I cant recall a TCS part on the TB but i could be wrong. I never went looking either

 

[syndicate]

Mike,
Its the large round unit below the tps. **edit** the unit in question is called the throttle actuator and it is below and next to the throttle angle sensor.

 

[arista5]

I have never messed with one of these but a quick search and i came up with this, if its correct it may help someone here know what the innards should look like (from a tsx for reference). Hope it helps.
http://tsx.acurazine.com/forums/showthread.php?t=658186

 

[syndicate]

Hmm. Looks different, but close to what mine looks like

 

[syndicate]

Does anyone have a throttle body for sale with all the sensors intact? Maybe left over from a big bore replacement or ITBs?

 

[A.S. Motorsport]

What year is your NSX?

 

[syndicate]

91.

 

[A.S. Motorsport]

A last ditch attempt could be to find a old TL, RL (96-04) or Legend TCS unit.
It's likely to have the same actuator only then remote mounted.

That said a replacing the whole unit with a used TB is easiest.