Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Im not completely sure. I would think some copper but the bearings are made of different metals. When taking the rod bearings out I notice the oil holes are extremely small. When getting new bearings I was thinking about having the machine shop chamfer the holes, make them slightly bigger. This will decrease the oil pressure, however I was thinking about porting my oil pump myself and maybe put a shim in the pressure spring to increase the oil pressure a bit. Have anyone ever done this to an nsx oil pump? Ive done it to my d16z6 (single cam) which theyre notorious for oil starvation and it worked well. It is a cheap DIY mod and will increase flow as well as pressure if done right.
Im not completely sure. I would think some copper but the bearings are made of different metals.
When taking the rod bearings out I notice the oil holes are extremely small. When getting new bearings I was thinking about having the machine shop chamfer the holes, make them slightly bigger. This will decrease the oil pressure, however I was thinking about porting my oil pump myself and maybe put a shim in the pressure spring to increase the oil pressure a bit. Have anyone ever done this to an nsx oil pump? Ive done it to my d16z6 (single cam) which theyre notorious for oil starvation and it worked well. It is a cheap DIY mod and will increase flow as well as pressure if done right.
