Downforce - Honda OEM Wires

[nsxpowered]

Normal wires available on the market are lower performance in terms of tolerance and performance. They are thick, stiff or too soft, hard to slide through looms, jacket melts and gets gummy, etc. OEM wires are thinner, higher current rating and more heat resistant (think of car fires). We are selling 3 of the most used wiring in the NSX. These wire the exact wires used by Honda cars assembled in Japan.

<hr>


<b>VSS125R-W</b>
$0.95/ft (minimum of 10 ft)
$28.00 - 50ft
$40.00 - 100ft

<b><u>Features</b></u>
<i>Honda Pigtail Standard Spec
Good for shoving into tight looms</i>

<hr>


<b>VSS125R-W</b>
$1.10/ft (minimum of 10ft)
$30.00 - 50ft
$44.00 - 100ft

<b><u>Features</b></u>
<i>Same Spec as VSS125R-W, just more flexible
Good for bundling or building harnesses</i>

<hr>


<b>VTC125B-R</b>
$1.25/ft (minimum of 10ft)
$35.00 - 50ft
$50.00 - 100ft

<b><u>Features</b></u>
<i>High Power / Current
Low Voltage Drop</i>

 

[nsxpowered]

Honda Connector / Terminal Pins

Okay for those that were looking for the terminal pins for the wiring here are the terminals used in the NSX. In stock ready to go. We also have connector housings available. If you want to build a custom harness or plug with all OEM components, we have everything you need. We can also get OEM wiring looms, tubing and sleeves as well.