Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
The door check assembly is an available part, 72380-SL0-013 (for the left hand side). That gets you a new door check and retainer for the pin; but, the door check pin is a separate part which is # 72341-SL0-003. The US parts systems drawings do not show the required detail to spot that bracket that the door check pin fits into. If you go to Amayama and look at the outer panel drawings, there is part number 04635-SL0-t01ZZ which shows the whole door jamb frame which Honda calls panel frame - outside. There is a bolt in piece in the drawing that looks like it might be the receiver for that pin on the door check; but, to me just looks more like a mounting bracket of some kind. However, that doesn't matter because that piece is only available as part of the panel frame which is unavailable in the US and $1400 + shipping from Amayama. Without going out and looking at my car which is currently in storage (so not an option) I am suspicious that the piece you are looking for is formed as part of the panel frame in which case replacement is not really a viable option.I would check your door check pin and look for wear because that part is less than $5. If that does not fix the problem then go to your Acura parts department and ask them if they can suss out a part number for that bracket. I suspect not in which case fabricating a small bushing / sleeve to fix the wear is probably the way to go.
The door check assembly is an available part, 72380-SL0-013 (for the left hand side). That gets you a new door check and retainer for the pin; but, the door check pin is a separate part which is # 72341-SL0-003. The US parts systems drawings do not show the required detail to spot that bracket that the door check pin fits into. If you go to Amayama and look at the outer panel drawings, there is part number 04635-SL0-t01ZZ which shows the whole door jamb frame which Honda calls panel frame - outside. There is a bolt in piece in the drawing that looks like it might be the receiver for that pin on the door check; but, to me just looks more like a mounting bracket of some kind. However, that doesn't matter because that piece is only available as part of the panel frame which is unavailable in the US and $1400 + shipping from Amayama. Without going out and looking at my car which is currently in storage (so not an option) I am suspicious that the piece you are looking for is formed as part of the panel frame in which case replacement is not really a viable option.
I would check your door check pin and look for wear because that part is less than $5. If that does not fix the problem then go to your Acura parts department and ask them if they can suss out a part number for that bracket. I suspect not in which case fabricating a small bushing / sleeve to fix the wear is probably the way to go.
