Reply to thread

I just finished removing both of my door panels on a '92 and the the way it seemed to work best for me was this:


(1)remove and disconnect door handle, and 2 sash covers

(2)remove all screws from perimeter of door panel

(3)pull all the perimeter tabs that were held by screws out            from behind the rubber seal so that the sides and bottom of the door panel are free

(4)you must then break the tension at the top of the door panel under the chrome strip - hold the door panel on each side and gently exert some upward force until the door panel pops free


Hope this helps.


John


Back
Top