DIY: Works Bell Steering Wheel Hub & Renown Steering Wheel (91-05)

[Chris_Lum]

This is a DIY on how to install a Works Bell Short Hub (Honda 290S), Works Bell Rapfix GTC-R flip up hub & a Renown USA steering wheel on a 91-05 Honda/Acura NSX. This is a very straight forward install and my personally recommended hub setup vs the OEM MOMO hub that I installed on a previous video. Because it retains the OEM SRS reel, the install time is cut significantly over the OEM MOMO setup. The Works Bell hub and flip up adapter come with everything needed to install as well as keep the SRS light off and keep the horn working as it should. Like all of my DIY videos, I recommend watching the video in it's entirety before attempting installation and always take the proper safety precautions when working with automotive SRS components.

Parts Used in this video:
-Works Bell Short Hub: Honda 290S model
-Works Bell Rapfix GTC Hybrid flip up hub
-Renown USA Champion Steering Wheel
-Tools Required:19mm Socket + extension
-Torque wrench capable of 36 ft*lbs
-Torx bits

Optional Tools:
-Rubber Strap Wrench: https://amzn.to/3kqOyjM
-Dremel w/sanding drum or file (to file down grounding wire tab)

0:00 - Intro
0:59 - Removing Factory Steering Wheel
4:15 - SRS Reel & Works Bell Hub
6:34 - SRS Light Defeat & Horn wiring
7:55 - Installing the Works Bell Short Hub
8:51 - Torquing the Hub Nut
9:04 - Tucking Away Wiring & Installing the Flip Up Adapter
12:18 - Modifying the Grounding Wire
13:04 - Installing the Horn Button
13:45 - Final Thoughts
15:02 - Photos