- Joined
- 3 May 2020
- Messages
- 204
In this video I'll guide you on a step by step process to disassemble, clean and reassemble your 1991-2005 Acura/Honda NSX blower unit. I removed this during my ABS upgrade installation video and decided to make this a stand alone video for those who just want to clean their blower unit. It's a pretty simple task to remove the blower (catch the removal the beginning of my ABS Upgrade video). And it's even simpler to disassemble the unit and give it a good cleaning or wipe down. It was filthy so I highly recommend you do this if you haven't done it before. Remember the NSX doesn't come with a cabin filter, so tons of dust and debris has been going through the blower unit and straight into your cabin.
Products in this video:
-Frost King expanding foam weather seal: https://www.homedepot.com/p/Frost-King-1-in-x-13-ft-Expanding-Foam-Tape-Weathership-EF41/310655227
Tools Required:
-Phillips screwdriver
-Scissors
-Mild degreaser or all purpose spray cleaner
-Cleaning brushes/toothbrushes
-White lithium grease
0:00 - Intro
0:13 - Disassembly
4:13 - Cleaning
6:18 - Reassembly
Products in this video:
-Frost King expanding foam weather seal: https://www.homedepot.com/p/Frost-King-1-in-x-13-ft-Expanding-Foam-Tape-Weathership-EF41/310655227
Tools Required:
-Phillips screwdriver
-Scissors
-Mild degreaser or all purpose spray cleaner
-Cleaning brushes/toothbrushes
-White lithium grease
0:00 - Intro
0:13 - Disassembly
4:13 - Cleaning
6:18 - Reassembly
