Reply to thread

Message

The chip is soldered to the ECU-board. You have to unsolder the OEM-chip, solder the socket onto the board and then plug the Dinan Chip in. With the socket you're able to plug-and-play the chips. If you haven't done this before give your ECU to a professional or electronic specialists to prevent messing up the board.

[QUOTE="goldNSX, post: 569639, member: 10201"] The chip is soldered to the ECU-board. You have to unsolder the OEM-chip, solder the socket onto the board and then plug the Dinan Chip in. With the socket you're able to plug-and-play the chips. If you haven't done this before give your ECU to a professional or electronic specialists to prevent messing up the board. [/QUOTE]

Verification

First Generation NSX
NSX Do-It-Yourself (1st Gen)
dinan ecu chip