Defi Link Display + Main unit + senders SOLD
SOLD:
- Defi Link display (Example picture):
- Defi Link control unit:
Including the following senders (all digital):
- Oil Pressure
- Oil Temperature
- Water Temperature
- Fuel Pressure
- Speed (standard)
- Rpm (standard)
Other sensors can still be purchased on ie. Ebay.
I paid over $ 1750,00 for this setup, it can be easily hidden in ie. an ashtray or airvent, gives you accurate readings. You can also put Defi Link meters into the daisy chain if you want ie. Turbo pressure shown analog.
The features:
- An easily recognizable graphic on each setting screen helps guide easy setting of warnings for Defi-Link Meters and Step Graph(Setting Assistance function).
The display uses OLED(organic light emitting diode).
OLED is an advanced display which is self light emissive, high contrast, high response, low power consumptive, and large view angle. It uses optimal technology for instant readability without afterimages of flicker even when seen from the passenger’s seat.
- Real-time digital information includes speed, oil temperature, water temperature, oil pressure, fuel pressure and exhaust temperature. Sensor sets need to be purchased separately to display the information on pressures and temperatures. Vehicle performance data and peak values are placed in memory for 3 minutes, allowing examination of data after running the vehicle.
- Defi-Link Control Unit II has a 3 minute memory. Defi-Link Control Unit has a 40 second memory. When the RPM signal wire is connected to Defi-Link Control Unit II or Defi-Link Control Unit, 2 warning levels can be set in addition to the warning setting made by Control Unit II or Control Unit, enabling the setting of a total of 3 warning levels(Tachometer Triple Warning Mode).
- When the water temperature sensor is connected, the warm-up condition can be monitored.
- A graphic animation plays after the ignition is turned on or off(Opening Mode/Ending Mode).
- The Warning LED lights when the set warning value is exceeded for oil temperature, water temperature, exhaust temperature (egt is not included) and engine RPM. The Warning LED lights when measured value drops below the set warning value for oil pressure and fuel pressure.
- Trouble locations are shown by graphics so that connection problems can be quickly corrected(Self-Diagnosis function).
- The structure of the mounting base allows height and angle adjustment so that it can match the shape of the instrument panel.
This link shows you all specs:
http://www.defi-shop.com/category/products/end/display/
I'm selling because i don't have plans to track my NSX anymore.
Sold to Kuni! Thanks Prime!
SOLD:
- Defi Link display (Example picture):
- Defi Link control unit:
Including the following senders (all digital):
- Oil Pressure
- Oil Temperature
- Water Temperature
- Fuel Pressure
- Speed (standard)
- Rpm (standard)
Other sensors can still be purchased on ie. Ebay.
I paid over $ 1750,00 for this setup, it can be easily hidden in ie. an ashtray or airvent, gives you accurate readings. You can also put Defi Link meters into the daisy chain if you want ie. Turbo pressure shown analog.
The features:
- An easily recognizable graphic on each setting screen helps guide easy setting of warnings for Defi-Link Meters and Step Graph(Setting Assistance function).
The display uses OLED(organic light emitting diode).
OLED is an advanced display which is self light emissive, high contrast, high response, low power consumptive, and large view angle. It uses optimal technology for instant readability without afterimages of flicker even when seen from the passenger’s seat.
- Real-time digital information includes speed, oil temperature, water temperature, oil pressure, fuel pressure and exhaust temperature. Sensor sets need to be purchased separately to display the information on pressures and temperatures. Vehicle performance data and peak values are placed in memory for 3 minutes, allowing examination of data after running the vehicle.
- Defi-Link Control Unit II has a 3 minute memory. Defi-Link Control Unit has a 40 second memory. When the RPM signal wire is connected to Defi-Link Control Unit II or Defi-Link Control Unit, 2 warning levels can be set in addition to the warning setting made by Control Unit II or Control Unit, enabling the setting of a total of 3 warning levels(Tachometer Triple Warning Mode).
- When the water temperature sensor is connected, the warm-up condition can be monitored.
- A graphic animation plays after the ignition is turned on or off(Opening Mode/Ending Mode).
- The Warning LED lights when the set warning value is exceeded for oil temperature, water temperature, exhaust temperature (egt is not included) and engine RPM. The Warning LED lights when measured value drops below the set warning value for oil pressure and fuel pressure.
- Trouble locations are shown by graphics so that connection problems can be quickly corrected(Self-Diagnosis function).
- The structure of the mounting base allows height and angle adjustment so that it can match the shape of the instrument panel.
This link shows you all specs:
http://www.defi-shop.com/category/products/end/display/
I'm selling because i don't have plans to track my NSX anymore.
Sold to Kuni! Thanks Prime!
Attachments
Last edited:
