Daliracing 1" F&R sway bars opinions?

[Oyagi]

I just bought a set a few weeks ago and plan on installing them this weekend.

I have read a lot of members have only installed the fronts. Some F&R. What are the opinions out there?

My only suspension mods right now are Tein Flex with EDFC and a carbing rear STB. The teins are not optimal yes, but thats all I have right now, baby steps please

Appreciate any advice.

 

[docjohn]

What are your spring rates? And how do you like your car to be ie neutral/under or over steer?

 

[Oyagi]

Spring Rates: 560lb / 672 rear

I'd prefer neutral with controllable (hint) of oversteer.

Help Doc!

 

[CL65 Captain]

Your car is already biased for oversteer with higher springs in the rear so my advice would be to run the Dali 1" in the front and OEM bar in the rear or no bar in the rear.

 

[docjohn]

I agree with ill capitain:wink:

 

[asylum]

I have these bars with the Tein Flex (10/12). I set front at the middle hole, rear full soft.

 

[Oyagi]

I have these bars with the Tein Flex (10/12). I set front at the middle hole, rear full soft.

How are they compared to without? How does the car behave?

I have been reading up a lot on sway bars and am suffering from too much info. I'd just like someone to slap me upside the head and say "do this!". :frown:

 

[docjohn]

How are they compared to without? How does the car behave?

I have been reading up a lot on sway bars and am suffering from too much info. I'd just like someone to slap me upside the head and say "do this!". :frown:

we just did,we said to just change the front bar.

 

[Hrant]

i agree with ill capitain:wink:

+1 ..........

 

[Oyagi]

Oh that's right! My ADD must have kicked on . OK, I'm going to go with just the fronts and report back.


Sent from my iPhone using Tapatalk

 

[asylum]

I had stock front and rear and installed both Dali track sway (fr 50% stiff, rr full soft). Car feels very well balanced. No special oversteer. I set the front shocks 25% to 75% steef depending of the track. Rear shocks are always set at ~5% stiff (one or two clicks). I run full slick tires.