Dali Racer Racing Cloth Seat Cushion

[NSXTC]

Need more headroom when wearing a helmet in your NSX? Butt sliding around in the seat? The Dali Racey Racer Seat Cushion is constructed from high density foam material and covered by high friction black tweedy looking cloth to blend in with your OEM seats. It keeps your ass in place and both cheeks comfy while you ripping around the track or off to Starbucks. It even comes standard with the 5th belt hole for those of you that like that "tied up" or "strapped in" feel. LOWERS YOUR SEATING POSITION ~2 INCHES.

Click here for more info

$80+12 Ground Shipping to any continental US street address. Email me at nsx at 1017 dot org or call 805-482-3054 x 2.

 

[Litespeeds]

I am interested. How is it installed? Please e-mail me at [email protected]
Thanks.

Sidney

 

[ANYTIME]

Here is how you do it:

1.) Unbolt the 4 bolts holding the seat to the floor board.
2.) Unbolt the seat belt from the seat.
3.) Put a towel on the door sill to protect the paint and lift up on the seat to unplug the wires under the seat.
4.) Carefully remove the seat.
5.) Protect the seat and lay it on its side so that you can see the bottom.
6.) The seat has plastic guides in the back, under the back cushion. Remove this and then pull up on the cushion after you pop the plastic rivets from the bottom cushion. Pull on the seat cushion to remove it. You will have to rip some glue that is holding the cushion to the seat frame, so do this gently.
7.) Now reinstall the seat. (don't forget to plug the power seat back in!)
8.) DONE! Use a towel to sit on while racing so your butt doesn't hurt! *
9.) Now you can place the seat cushion back in its normal location and place
the plastic guide back up under the back cushion for daily driving. It will now come in and out with a little tug.

This is easy to do and shouldn't take more than 20 minutes.
Bill Pierce gets credit for this info.

 

[NSXTC]

SOLD!