Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Just did a timing belt, water pump, LMA, gaskets and clutch and after putting it back together it cranks but won't fire. It also sat for 12 years and had some rats visit. Only chewed one wire that I could find and everything looked really good when apart.Now it cranks but doesn't fire. It's getting fuel to the rails and spark plugs are wet with fuel. I haven't done a compression check but it sounds "normal" when cranking. I'm thinking ignition system. Sensor, relay, etc.All fuses are good.Have not checked any relays.Suggestions for next step? Dan
Just did a timing belt, water pump, LMA, gaskets and clutch and after putting it back together it cranks but won't fire. It also sat for 12 years and had some rats visit. Only chewed one wire that I could find and everything looked really good when apart.
Now it cranks but doesn't fire. It's getting fuel to the rails and spark plugs are wet with fuel. I haven't done a compression check but it sounds "normal" when cranking. I'm thinking ignition system. Sensor, relay, etc.
All fuses are good.
Have not checked any relays.
Suggestions for next step?
Dan
