corner balancing...HELP

Joined
15 November 2008
Messages
274
Location
Las Vegas
Ok i just got my KW v3 put in on monday and was told i can get my corner balancing and alignment done at this one particular shop (the one off decatur/215 which is no longer there) but when i called they could not longer get the scales to do the corner balancing. So i had to get my alignment done elsewhere and i cannot find anyone else in town to do a corner balance.

I know there are some track gurus in vegas that might be able to help me or lead me in the right direction to get a corner balance. Any suggestions?
 
Danny should be able to hook you up:confused:
 
Agreed talk to Danny, Bryan, etc....otherwise come to Darin at West End Alignment in Gardena, Ca.
 
I might be able to answer this.....Autowave (danny) and Fes (Bryan). I know Fes is busy with FXMD and Autowave is in Cali. Any other suggestions? LOL
 
The LV Porsche Club has corner-weight scales. I believe LDL Speed Shop at the Las Vegas Motor Speedway has scales as well. I'll see Dennis (LDL) tomorrow night; and I will let you know. Dennis does work for some rally teams, and is getting into suspension fabrication /setup. Rally cars break their suspensions on a regular basis. :biggrin:
 
I forgot about LDL. I talked to Jarrod and he didnt do corner balancing. But i do appreciate you checking with them about corner balancing. Thanks
 
I would suggest contacting Fes with setting up your car. He can be reached at 702-742-0663. Or you can contact me at [email protected] and I can help set it up with him. You are going to want to have someone with the right equipment and knowledge setting up your car. I am not sure if the above mentioned shops possess that knowledge. Hope this helps.
 
Last edited:
I forgot about LDL. I talked to Jarrod and he didnt do corner balancing. But i do appreciate you checking with them about corner balancing. Thanks

Dennis does not have his corner weight system yet; not for another month or two. That leaves the LV Porsche Club, or the fellow Ken recommends. Someone with NSX suspension experience would be the best choice for this type of work.
 
Back
Top