comptech lip

[nhohoang]

hello every one, does anyone know how much and what kind of modication needs to be done to get it to work, to get this comptech lip to fit into my nsx, thnks

 

[ChopsJazz]

What Comptech lip?

 

[nhohoang]

sorry, the wide body lip,

 

[Osiris_x11]

sesky...

hello every one, does anyone know how much and what kind of modification needs to be done to get it to work, to get this comptech lip to fit into my nsx, thnks

Here...





(courtesy of Otto Detailing)

The best protocol is to use a 3M VHB mounting-tape to adhere the CT lip to the front-bumper's lower-valance, and then special rivet-like screws which are then plugged w/ putty & painted-over.

Otherwise, windshield adhesive can be used alone. But, this is costly & requires a lot of clamping to secure for proper setting & curing.

For a seamless/molded look, then urethane filler is required afterwards. This will permanently alter the front-bumper's lower-valance. Also, there is some likelihood cracks/splits to surface. Some NSX'ers w/ Wings West front-lips have gone this route (molded-front).

I have since removed mine. It looks great, but it does a number on the front-bumper's lower-valance due to it being virtually indestructible (the OEM lip is more forgiving as it sheers off). I will likely keep the CT lip (in-storage), as it's very rare & my fav' NSX lip (for '91-'01 NSX models).


EDIT: Here are some side-profile pics, yes- the sides of the CT lip need to be trimmed...