Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I did attempt to reply but it's not been approved by mods.It was indeed the mid plate that needed initialising.There is a great guide on Prime for this.What i did find though, if you follow the 360 degree turns, you will find the bolt will not clear the sump if it's not in enough for the first initial turn, once they clear you can repeat the 360 process.I also noted, how horrible the bolts felt when screwing in, they went in straight but the pressure from the mid place with resistance from maybe aged threads, i found a little grease on the thread helped it screw in. I was worried i would snap the thread off while screwing in, something to be mindful of.
I did attempt to reply but it's not been approved by mods.
It was indeed the mid plate that needed initialising.
There is a great guide on Prime for this.
What i did find though, if you follow the 360 degree turns, you will find the bolt will not clear the sump if it's not in enough for the first initial turn, once they clear you can repeat the 360 process.
I also noted, how horrible the bolts felt when screwing in, they went in straight but the pressure from the mid place with resistance from maybe aged threads, i found a little grease on the thread helped it screw in. I was worried i would snap the thread off while screwing in, something to be mindful of.
