My 1997 NSX-T's clutch master cylinder needs to be replaced. The one on Dali's website lists it is a "5-speed." Will this still work for a 1997, which is of course a 6-speed?
Thanks for your help.
Thanks for your help.
Clutch Master Cylinder on Dali Racing
- Thread starter ajchang
- Start date
Did you send Mark an e-mail asking if it's the same. He can get any OEM part so even if it's different :smile:
I can't imagine why they would be different.
A quick check of part numbers agrees:
http://www.acuraautomotiveparts.org
You should replaced the slave and the master....very cheap insurance.
Drew
A quick check of part numbers agrees:
http://www.acuraautomotiveparts.org
You should replaced the slave and the master....very cheap insurance.
Drew
Do not forget to replace the rubber hose too. Mine was leak yesterday.
I know of someone who replaced only the slave cylinder, and the old loose master cylinder was not capable of fully pushing the new tight slave cylinder. He had to then replace the master to get it to work correctly again. So you do need to do both at once.
Well for the guy who just replaced his old clutch slave rubber hose with a stock one, you should have done it with a new teflon stainless steel braided version for the same price including the shipping. I made these so you would never have to change this part again so look for it in the vendor section if you need to see them. They are built to the highest specs. available. :biggrin:
Similar threads
