Hey, i as curious where i can get a pair of the clear side markers in the front.
Clear Side Bumper lights
- Thread starter Tobal
- Start date
- Joined
- 10 April 2001
- Messages
- 662
Do a search and you will find the answer.
http://clearcorners.com/products/acura/nsx1/
I think you have to send in your lens and they change it to a clear lens.
[This message has been edited by NSX2NV (edited 22 October 2002).]
I think you have to send in your lens and they change it to a clear lens.
[This message has been edited by NSX2NV (edited 22 October 2002).]
Hrm.. i guess there isn't a company that just makes them. So i guess the only way to get it cleared is to do a custom job on it.
I would be interested to try that myself.
------------------
ALL NSX
92 RED/BLACK 5-SPEED
------------------
ALL NSX
92 RED/BLACK 5-SPEED
Here are 2 cars with them...
silver NSX
black NSX
silver NSX
black NSX
Fellas,
Just wanted to let you know that I attempted this mod & aborted halfway, mainly because if I can't fabricate something that doesn't look homemade, I won't put it on my NSX. I've done numerous engine cover for other NSXers on this board & they've all come out looking factory. However, the difficulty w/ the sidemarkers is finding a flat, clear plastic donor lens from another vehicle. The fact that donor lens size is irrelevant (since I would have cut & shaped the lens anyway) did not help my search. Problem is , most lens from other cars tend to have less usable flat surface than the NSX lens. Most lens are contoured & just cannot be made to seal nicely onto the NSX lens housing. BTW, separating the lens from the housing is another task. Lens is glued & I used a scouring knife to literally scrape through the glue & carefully pry the lens apart. Anyway, after spending a week going from Home Depot, plastics shops, & parts departments looking for clear plastic or donor lens, I gave up. I guess one of these days I fork up $100 + ship my NSX lights to Clearcorners.com!
Just wanted to let you know that I attempted this mod & aborted halfway, mainly because if I can't fabricate something that doesn't look homemade, I won't put it on my NSX. I've done numerous engine cover for other NSXers on this board & they've all come out looking factory. However, the difficulty w/ the sidemarkers is finding a flat, clear plastic donor lens from another vehicle. The fact that donor lens size is irrelevant (since I would have cut & shaped the lens anyway) did not help my search. Problem is , most lens from other cars tend to have less usable flat surface than the NSX lens. Most lens are contoured & just cannot be made to seal nicely onto the NSX lens housing. BTW, separating the lens from the housing is another task. Lens is glued & I used a scouring knife to literally scrape through the glue & carefully pry the lens apart. Anyway, after spending a week going from Home Depot, plastics shops, & parts departments looking for clear plastic or donor lens, I gave up. I guess one of these days I fork up $100 + ship my NSX lights to Clearcorners.com!
nsx1164, why don't you put the same silver/clear glass on the rear too? The red one looks quite out of place now!
Similar threads
