Clear Corners LED front-sidemarker amber turn-signal connection?

[Osiris_x11]

I acquired some Clear Corner LED front/rear sidemarkers quite awhile back.

The rears are simple plug-&-play, just connect into OEM harness.

The fronts are not so simple (to me) plug-&-play. They do connect into the OEM harness, for the 2-row white LED function. But for the 1-row amber LED function, a red wire needs to be affixed/tapped-in to the 12v turn-signal something.

Here are some reference pics:






Anyone know what/how to connect that red wire, to get the amber LED turn-signal function?

Thanks, in-advance!

 

[Osiris_x11]

throw 'ma a bone...

 

[Moses]

Tap into one of the 2 wires to see which wire powers the blinker. You probably need to tap into one of the front blinker wires. Have you emailed clearcorners for an answer? I'm guessing it's the blu/grn wire on driver side and grn/yel on passenger side front blinkers.

 

[Osiris_x11]

Shall give it a go, finally...

Tap into one of the 2 wires to see which wire powers the blinker. You probably need to tap into one of the front blinker wires. Have you emailed clearcorners for an answer? I'm guessing it's the blu/grn wire on driver side and grn/yel on passenger side front blinkers.

Thanks for the input (I had bookmarked the thread when you replied for future reference when I would actually install the front ClearCorners LED side-markers, which is hopefully this weekend... ha, better late than never!).

Anyone else ever do this w/ the ClearCorner LED side-markers and/or custom side-marker setup?

 

[Moses]

23-208
-209

of service manual

 

[Chris NSX]

Re: Shall give it a go, finally...

Anyone else ever do this w/ the ClearCorner LED side-markers and/or custom side-marker setup?

Clear Corners

Clear / LED Front Side-Marker

The other wires should connect to the Clearcorner headlights, e-mail Mike at clearcorner and he will help you out.