Changing out the sway bars

[Coz]

Going to change out the stock sway bars for the Dali 1" hollow sway bars front and rear.
Looks and seems pretty straight forward....
Anything I should be aware of that you guys can think of ?
Thanks.
Jim

 

[CL65 Captain]

Allen wrench in the ends, otherwise the bolt spins. The first time you go to turn the nut you will understand.

 

[MJK]

I had to reverse the drop links in mine to allow everything a little more clearance. I have CT sways, not Dali, but that is just something you may want to file away.

 

[kye]

I recently installed the CT bars, the allen key/wrench is a must - it can be very tough to undo the drop links so some free up spray might be good (I used this), also reversing the drop links was good for me since it meant that they were in a more straight position which is desirable. Lastly I would say that the rear sway was a piece of cake to change, the front one gave me a lot of hassle to get it into place, finally it was persuaded with brute force to pop into location.
//Kye

 

[Coz]

Thanks guys, appreciate the impute much....