Reply to thread

Message

Hi Michael,

Hopefully you have a high speed internet connection. Go to the on line service manual on NSXPrime here:

http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm

Go to page 18-9 and review the alignment pages, specifically the caster. Check to be sure you have loosened BOTH nuts required to free up the Compliance Pivot Lower Bracket. This bracket is pictured on page 18-20.

If you have them both loose and no luck, remove them and remove the bracket and see if you can free it up. It is just odd to me since we are talking about all aluminum parts that they would be siezed.

HTH,
LarryB

<blockquote data-quote="Larry Bastanza" data-source="post: 209528" data-attributes="member: 3729">Hi Michael,Hopefully you have a high speed internet connection.&nbsp; Go to the on line service manual on NSXPrime here:<a href="http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm" target="_blank">http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm</a>Go to page 18-9 and review the alignment pages, specifically the caster.&nbsp; Check to be sure you have loosened BOTH nuts required to free up the Compliance Pivot Lower Bracket.&nbsp; This bracket is pictured on page 18-20.If you have them both loose and no luck, remove them and remove the bracket and see if you can free it up.&nbsp; It is just odd to me since we are talking about all aluminum parts that they would be siezed<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />. HTH,LarryB</blockquote>

[QUOTE="Larry Bastanza, post: 209528, member: 3729"] Hi Michael, Hopefully you have a high speed internet connection. Go to the on line service manual on NSXPrime here: [url]http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm[/url] Go to page 18-9 and review the alignment pages, specifically the caster. Check to be sure you have loosened BOTH nuts required to free up the Compliance Pivot Lower Bracket. This bracket is pictured on page 18-20. If you have them both loose and no luck, remove them and remove the bracket and see if you can free it up. It is just odd to me since we are talking about all aluminum parts that they would be siezed:). HTH, LarryB [/QUOTE]

Verification