I'd like to just post and say hello and make my first post as a vendor. I've had a few members PM me asking me to do parts and have done so successfully thus far. I'd like to offer this service for other prime members as well. Just to clarify this is a lamination/overlay service. I do not produce nor do I make things from scratch. This is just another option out there and someday yes, I will be starting on some cool projects, but we'll see. All my parts use epoxy and a 2 part automotive clear process.
This is how the steps work and what the realistic time frame is if you go this route.
1. You decide on parts/maybe a few parts at once. I only do a select few so bare with me. The reason is the last thing I want to do is take your items or do an item and it take 3x the time quoted or take your item, screw it up basically, and not finish the job. So therefore I only do about 4 interior items which I will list below.
You must send a $xxx amount deposit paypal for me to take you seriously, if not I'll start work on other parts or projects, the deposit varies by how many parts you're looking for and also if you want me to source anything special
2. Option 1. You wait until I source some parts "which I have some already", and you keep your stock ones until I finish the job, and ship the carbon overlaid items to you or Option 2. You take the items off your car. Ship them to me, and I ship them back to you. Some people prefer this and the reason is sometimes clips break and they want their own parts back. I respect that. I haven't had an issue with option 1 but I can see it being a problem if people start sending me parts that no longer mount.
3. I get the parts I start the process. It takes me about a month to start and finish a part/batch. That includes any minor set backs because fixing items sets you back days.
4. I collect payment
5. I ship your parts USPS insured, and tracking.
6. You get parts and say you're happy
7. You ship your stock parts back to me.
Here's a list of why I'm different than some vendors here or people that have come and gone in the past.
1. I've completed and finished about 3-4 sets of parts
2. I have an Nsx so I actually care
3. I have a full time job so I'm not going to take your money and run
4. I'll never take a payment unless the work will be shipped within the next day or two
5. I won't take more than 1 or 2 people's parts depending on how many at a time.
6. It takes me a long time to do "negative".
I'll start posting some pictures with what I have done in the past and this thread can build "slowly" as I finish up more items.
List of parts I do. Items are all $ plus exchange of stock parts.
I've a few other misc parts as well that some may have seen in pictures but as of right now these are the items I'm offering
1. Triangle covers $250
2. Arm Rest Single or Double Lid $250
3. Interior Pillars $300
4. Clock Assembly Trim $250
5. Pinch Covers $300
6. Side Bolsters $300
Please feel free to contact me with any questions or concerns.
Now for the pictures.
This is how the steps work and what the realistic time frame is if you go this route.
1. You decide on parts/maybe a few parts at once. I only do a select few so bare with me. The reason is the last thing I want to do is take your items or do an item and it take 3x the time quoted or take your item, screw it up basically, and not finish the job. So therefore I only do about 4 interior items which I will list below.
You must send a $xxx amount deposit paypal for me to take you seriously, if not I'll start work on other parts or projects, the deposit varies by how many parts you're looking for and also if you want me to source anything special
2. Option 1. You wait until I source some parts "which I have some already", and you keep your stock ones until I finish the job, and ship the carbon overlaid items to you or Option 2. You take the items off your car. Ship them to me, and I ship them back to you. Some people prefer this and the reason is sometimes clips break and they want their own parts back. I respect that. I haven't had an issue with option 1 but I can see it being a problem if people start sending me parts that no longer mount.
3. I get the parts I start the process. It takes me about a month to start and finish a part/batch. That includes any minor set backs because fixing items sets you back days.
4. I collect payment
5. I ship your parts USPS insured, and tracking.
6. You get parts and say you're happy
7. You ship your stock parts back to me.
Here's a list of why I'm different than some vendors here or people that have come and gone in the past.
1. I've completed and finished about 3-4 sets of parts
2. I have an Nsx so I actually care
3. I have a full time job so I'm not going to take your money and run
4. I'll never take a payment unless the work will be shipped within the next day or two
5. I won't take more than 1 or 2 people's parts depending on how many at a time.
6. It takes me a long time to do "negative".
I'll start posting some pictures with what I have done in the past and this thread can build "slowly" as I finish up more items.
List of parts I do. Items are all $ plus exchange of stock parts.
I've a few other misc parts as well that some may have seen in pictures but as of right now these are the items I'm offering
1. Triangle covers $250
2. Arm Rest Single or Double Lid $250
3. Interior Pillars $300
4. Clock Assembly Trim $250
5. Pinch Covers $300
6. Side Bolsters $300
Please feel free to contact me with any questions or concerns.
Now for the pictures.
Attachments
Last edited: