Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
99% of these carbon parts use polyester resin , the mold is first sprayed with clear gelcoat , then carbon is laid up , then fiberglass after that .What you need is to have the backside laid up with a few (quite a few) layers of 'glass , then you can refinish the front by sanding out the cracks and re-clear / gelcoat the top , this is working backwards but short of buying a new one and reinforcing it , you really have no other options.
99% of these carbon parts use polyester resin , the mold is first sprayed with clear gelcoat , then carbon is laid up , then fiberglass after that .
What you need is to have the backside laid up with a few (quite a few) layers of 'glass , then you can refinish the front by sanding out the cracks and re-clear / gelcoat the top , this is working backwards but short of buying a new one and reinforcing it , you really have no other options.
