Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Take the main relay out and pop it open. Heat up the solder balls on the back side. Do NOT over heat!!! Just heat them enough to turn the solder back to liquid. Reinstall the relay. This shouldn't take long at all. This will rule out main relay. Also, when it did start up and idle for a few seconds, did it idle normally or was it studdering? Feel free to call my cell if you want to talk. 919-539-2131Thanks,JayEdit: I can also help you troubleshoot the Viper as I have been installing them for 15+ years.
Take the main relay out and pop it open. Heat up the solder balls on the back side. Do NOT over heat!!! Just heat them enough to turn the solder back to liquid. Reinstall the relay. This shouldn't take long at all. This will rule out main relay.
Also, when it did start up and idle for a few seconds, did it idle normally or was it studdering? Feel free to call my cell if you want to talk. 919-539-2131
Thanks,
Jay
Edit: I can also help you troubleshoot the Viper as I have been installing them for 15+ years.
