i hit a nasty pot hole and bent 3 rims and a tie rod. after getting them fixed, wheels balanced, and a full alignment... the car is pulling to the left when i brake. this wasn't happening before the alignment. any ideas as to what's going on?
i hit a nasty pot hole and bent 3 rims and a tie rod. after getting them fixed, wheels balanced, and a full alignment... the car is pulling to the left when i brake. this wasn't happening before the alignment. any ideas as to what's going on?
Sounds like you whacked the suspension good. I would check out the calipers, look for one stuck on the slide pins, check for pads cocked or out of position. If every thing with the brakes is good then look for more suspension damage. I would start looking at the compliance system in the front.
I am sure you checked the tire pressure, but if you didn't it would be worth looking at. Last time I had a tire serviced they gave it back to me with 45 PSI! Since you had 3 of the 4 wheels serviced there is a chance that might be the culprit?
Check if the balancing lead (Pb) on the wheel is not hitting the caliper (Or scrapes) when braking caliper gets hot =bigger and this will result in stiff around the corner.......(Had this problem once and really was amazed what such a small pease can do)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.