So I've got F/R Rotora BBK. They offer no seperate park brake like Brembo does. Will Brembo's park brake setup work here? Where would I get this if so? Thanks.
So I've got F/R Rotora BBK. They offer no seperate park brake like Brembo does. Will Brembo's park brake setup work here? Where would I get this if so? Thanks.
They should depending on how the rear brake caliper mounts. If it mounts in the stock location, then no problem. You can contact Vroom to see if he has any brackets still available. If you can get the brackets from him, look for the parking brake from a Viper, it is the Brembo parking brake and a WHOLE lot cheaper on Ebay. Or, just order the Brembo setup for a LOW LOW $1000. By the way, you only need one side.
David, I can send some pics of a setup sitting on my table atm if you need some. Jeff (Vroom) use to make the brackets but I believe the GB was for a 14" rear rotor. I believe you will need one closer to 13" if I recall the Rotora sizing properly. The brackets will work as long as the diameter is specified properly. The other dimension to fitment is the offset spacing of the bracket. That is easily done with hardened washers to an extent.
I do have 2 more sets available but they are for 14" rotors. I designed these for my application and had extras laser cut. Most of the rotors on the rear of an NSX are for 13". If your looking for 13", contact Dave (Titanium Dave) he did have some at one time...hope that helps.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.