Paxton Novi 2000 based centrifugal supercharger system.
Carrier arm includes bearings with under 1000 miles (replaced by Science of Speed)
This system includes:
Basic BBSC (carrier arm/shaft/pulley for 9.8 psi, $6500 new)
Cold air intake system ($200 option when purchased new)
Aftercooler system (about $3000 new)
550 CC RC injectors ($700 new, have 12,000 miles on them)
Assorted brackets
Polished aluminum coolant reservoir
This system does not include a management system. I used the AEM FIC with fantastic success.
This system does not include the front mount heat exchanger for the aftercooler. Science of Speed sells a ready-to-go bolt in system which easily remidies that. The Aftercooler included with the BBSC will need that to remove the heat from the coolant that it picks up from the intake.
The aftercooler is already tapped for use with methanol or nitrous. I used methanol (listed separately in the FS section on nsxprime) with great success.
$5000 obo plus SH or local pickup from 85383
This system put down 440 rwhp on my stock motor for a very very very long time. I encourage interested parties to read some of my posts, I've got the most documented BBSC here on nsx prime.
If you want a different size pulley, feel free to ask. I can have any size/psi level made for you.
I will NOT separate out the aftercooler from this system.
Carrier arm includes bearings with under 1000 miles (replaced by Science of Speed)
This system includes:
Basic BBSC (carrier arm/shaft/pulley for 9.8 psi, $6500 new)
Cold air intake system ($200 option when purchased new)
Aftercooler system (about $3000 new)
550 CC RC injectors ($700 new, have 12,000 miles on them)
Assorted brackets
Polished aluminum coolant reservoir
This system does not include a management system. I used the AEM FIC with fantastic success.
This system does not include the front mount heat exchanger for the aftercooler. Science of Speed sells a ready-to-go bolt in system which easily remidies that. The Aftercooler included with the BBSC will need that to remove the heat from the coolant that it picks up from the intake.
The aftercooler is already tapped for use with methanol or nitrous. I used methanol (listed separately in the FS section on nsxprime) with great success.
$5000 obo plus SH or local pickup from 85383
This system put down 440 rwhp on my stock motor for a very very very long time. I encourage interested parties to read some of my posts, I've got the most documented BBSC here on nsx prime.
If you want a different size pulley, feel free to ask. I can have any size/psi level made for you.
I will NOT separate out the aftercooler from this system.
