ALB diagnosis help

Joined
1 June 2005
Messages
821
Location
Switzerland
So my "brake lamp" comes on, then the brake warning light after some seconds and finally the ALB warning light after some more seconds. No more ALB on all 4 wheels. Brake fluid is ok on both tank.

What I plan to do :

- check all fuses concerning brakes.
- try to activate the ALB pump by bridging the relay (if it doesn't pump, then it is the ALB pump).
- release pressure in the system with the T wrench tool and hear if the pump activate when starting the car (if it doesn't, it is the relay).
- check the solenoids... but my ALB isn't working on all 4 wheels. A stuck or wrong solenoid would only affect one wheel, wouldn't it ?

What else to do or think about ?

Thanks for your help.
 
Do you hear it running for about 2 minutes when you first start the car?
 
I was at a trackday. No problem in the morning. It happened in the afternoon. And to say I didn't hear the ALB pump working any more...

The motor can be replaced or it is a $$$ whole pump assembly ?
 
Back
Top