Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
When the accusump is empty you should put around 8psi into it.You need a little pressure so it will empty out.65psi is to much pressure. The clamps that hold the accusump need to be placed at the ends not in the center of the accusump. It is possible to crimp the boar and the piston wont travel past the crimp.My original canton electric valve went out. I am now using a Moroso valve that works well.Hope this helpsLater,Don
When the accusump is empty you should put around 8psi into it.
You need a little pressure so it will empty out.
65psi is to much pressure.
The clamps that hold the accusump need to be placed at the ends not in the center of the accusump. It is possible to crimp the boar and the piston wont travel past the crimp.
My original canton electric valve went out. I am now using a Moroso valve that works well.
Hope this helps
Later,
Don
