Sale Pending
-
Re: 96 Midnight Pearl CTSC NSX Vin: JH4NA1181TT000359
+
*
Text Changes
-
1) What color is the interior?
Black with Red NSX-R carpet from this link below.
http://www.nsxprime.com/forums/showthread.php?t=130387&highlight=carpet
2) Can you send, or provide a link to, a complete set of pics, esp. the small dings on the fender and pillar?
Uploaded
3) I would NOT want the 2002 rear valance or the ProCar items. What's your asking price for the car as shown in the ad?
$36,000
4) Any history of collision damage/paintwork?
No History of collision/I have done no paintwork myself but previous owner had front bumper repainted due to rock chips.
5) What ring & pinion was installed with the short gears?
4.55 comptech gear set
6) Do the rear Brembos have the e-brake option fitted?
Yes
7) Do you think I should drive the car to ……… with the bypass valve in its current condition?
I've been driving it for about 8 months and didn't realize that it was loosing boost for that period. Couldn't figure out why the NA nsx's were just as fast since i used to pass them easily now i know why. Does use up a little more gas. I would rather have my mechanic answer that question. Which i'll ask him tomorrow and ask him what the cost would be to install it. He is the best and cheapest mechanic that i know of. JavaJohn on Prime here drove from Springfield as the Dealer want $7k in services and he paid $2,200 at my mechanic. If you want to split Covered Carrier i think it's like $1000 to NY so just take off $500 from the price. Make sure they are covered carries and licensed and bonded.
8.) Timing Belt/Water Pump?
I have not replaced it and I'm not sure if original owner did either. I purchased it around 45-48k miles.
9.) TCS/ABS with Brembo?
No problems with either
10.)If we can put a deal together, I have cash and can move quickly.
Yes, that is fine.
Procar Spec 2 Spoiler with black LED i took RWG off for pictures. I have OEM one also.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Procar%20Spoiler.JPG
Engine Bay Image. This is supposed to be the Handbuilt Manifold. Also that is a polished non anodized Comptech Strut Bar with a Procar sticker. Everything is vinyl so it can be removed.
http://home.comcast.net/~lowcarbarchitecture/ForSale/All%20comptech%20Special%20Polished%20Brace.JPG
This is the current look of the rear with 2002+ rear and ProCar Spoiler and Rear Valance. LED looks Black but the flash made it look white as the there is some type of prism inside.
2002 Rear with Procar Diffusor and Spec 2 Spoiler.JPG
Driverside Interior.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20side.JPG
Interior View. That is part of the simpson 6pt harness across the divers seat. Shift Nob is Gruppe M with NSX-R center. I have the alcantara for the door inserts as the 2 square panels on the firewall has been done.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Interior.JPG
Dash close up
http://home.comcast.net/~lowcarbarchitecture/ForSale/Dash.JPG
Boomerang see link below and photo. This has not been an issue as i have checked alignment 3 times and may still have the print out somewhere. Its been like this for a while.
http://www.nsxprime.com/forums/showthread.php?t=132904
http://home.comcast.net/~lowcarbarchitecture/ForSale/Boomerang.JPG
Ding to driverside fender. It's the white speck. Just want to make sure I represent everything i can find.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20Fender1.JPG
Another Angle
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20Fender2.JPG
Ding to top of Driver H-Pillar
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20H-Pillar.JPG
This is the passenger side Fender. Looks like it was egged.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Passenger%20Fender.JPG
This is the passenger side H-Pillar. Looks like it was egged.http://home.comcast.net/~lowcarbarchitecture/ForSale/Passenger%20H-Pillar.JPG
-
Re: 96 Midnight Pearl CTSC NSX Vin: JH4NA1181TT000359
+
*
Text Changes
-
1) What color is the interior?
Black with Red NSX-R carpet from this link below.
http://www.nsxprime.com/forums/showthread.php?t=130387&highlight=carpet
2) Can you send, or provide a link to, a complete set of pics, esp. the small dings on the fender and pillar?
Uploaded
3) I would NOT want the 2002 rear valance or the ProCar items. What's your asking price for the car as shown in the ad?
$36,000
4) Any history of collision damage/paintwork?
No History of collision/I have done no paintwork myself but previous owner had front bumper repainted due to rock chips.
5) What ring & pinion was installed with the short gears?
4.55 comptech gear set
6) Do the rear Brembos have the e-brake option fitted?
Yes
7) Do you think I should drive the car to ……… with the bypass valve in its current condition?
I've been driving it for about 8 months and didn't realize that it was loosing boost for that period. Couldn't figure out why the NA nsx's were just as fast since i used to pass them easily now i know why. Does use up a little more gas. I would rather have my mechanic answer that question. Which i'll ask him tomorrow and ask him what the cost would be to install it. He is the best and cheapest mechanic that i know of. JavaJohn on Prime here drove from Springfield as the Dealer want $7k in services and he paid $2,200 at my mechanic. If you want to split Covered Carrier i think it's like $1000 to NY so just take off $500 from the price. Make sure they are covered carries and licensed and bonded.
8.) Timing Belt/Water Pump?
I have not replaced it and I'm not sure if original owner did either. I purchased it around 45-48k miles.
9.) TCS/ABS with Brembo?
No problems with either
10.)If we can put a deal together, I have cash and can move quickly.
Yes, that is fine.
Procar Spec 2 Spoiler with black LED i took RWG off for pictures. I have OEM one also.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Procar%20Spoiler.JPG
Engine Bay Image. This is supposed to be the Handbuilt Manifold. Also that is a polished non anodized Comptech Strut Bar with a Procar sticker. Everything is vinyl so it can be removed.
http://home.comcast.net/~lowcarbarchitecture/ForSale/All%20comptech%20Special%20Polished%20Brace.JPG
This is the current look of the rear with 2002+ rear and ProCar Spoiler and Rear Valance. LED looks Black but the flash made it look white as the there is some type of prism inside.
2002 Rear with Procar Diffusor and Spec 2 Spoiler.JPG
Driverside Interior.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20side.JPG
Interior View. That is part of the simpson 6pt harness across the divers seat. Shift Nob is Gruppe M with NSX-R center. I have the alcantara for the door inserts as the 2 square panels on the firewall has been done.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Interior.JPG
Dash close up
http://home.comcast.net/~lowcarbarchitecture/ForSale/Dash.JPG
Boomerang see link below and photo. This has not been an issue as i have checked alignment 3 times and may still have the print out somewhere. Its been like this for a while.
http://www.nsxprime.com/forums/showthread.php?t=132904
http://home.comcast.net/~lowcarbarchitecture/ForSale/Boomerang.JPG
Ding to driverside fender. It's the white speck. Just want to make sure I represent everything i can find.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20Fender1.JPG
Another Angle
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20Fender2.JPG
Ding to top of Driver H-Pillar
http://home.comcast.net/~lowcarbarchitecture/ForSale/Driver%20H-Pillar.JPG
This is the passenger side Fender. Looks like it was egged.
http://home.comcast.net/~lowcarbarchitecture/ForSale/Passenger%20Fender.JPG
This is the passenger side H-Pillar. Looks like it was egged.http://home.comcast.net/~lowcarbarchitecture/ForSale/Passenger%20H-Pillar.JPG
Last edited by a moderator:
