Selling my motor I just built last spring 
. I totalled my 93 so now all the good stuff is going.
This is a 2000 3.0L short block with a total of 6K miles on the it, the heads have 44K miles and were is such good condition there was no reason to re-do them when I put the motor back together in March. The motor has a new water pump, new timing belt, seals, Comptech high volume oil pump. It uses no oil in the two oil changes I have done since it has been together. The injectors were cleaned and flow tested by RC engineering. It is set up with an early Comptech supercharger, one with a welded intake manifold which flows better than the later cast ones. I built this motor with the intention of not having to open it up for 100K +, nothing was spared, no short cuts taken. All coolant hoses were replaced, new knock sensor, silicone or stainless vacuum and breather lines through out.
I would like to sell the motor with the Comptech supercharger kit, complete. I will include the wire harness, Map sensor, all lines, fuel filter, all electric parts, spare belt, it should be a complete plug and play set up. I had completely sorted this, A/F tested and everything was solid.
I spent over $10K putting the motor back together, asking $14K for everything. If you are interested in part please PM me with offers.
Thanks,
Dave
. I totalled my 93 so now all the good stuff is going.This is a 2000 3.0L short block with a total of 6K miles on the it, the heads have 44K miles and were is such good condition there was no reason to re-do them when I put the motor back together in March. The motor has a new water pump, new timing belt, seals, Comptech high volume oil pump. It uses no oil in the two oil changes I have done since it has been together. The injectors were cleaned and flow tested by RC engineering. It is set up with an early Comptech supercharger, one with a welded intake manifold which flows better than the later cast ones. I built this motor with the intention of not having to open it up for 100K +, nothing was spared, no short cuts taken. All coolant hoses were replaced, new knock sensor, silicone or stainless vacuum and breather lines through out.
I would like to sell the motor with the Comptech supercharger kit, complete. I will include the wire harness, Map sensor, all lines, fuel filter, all electric parts, spare belt, it should be a complete plug and play set up. I had completely sorted this, A/F tested and everything was solid.
I spent over $10K putting the motor back together, asking $14K for everything. If you are interested in part please PM me with offers.
Thanks,
Dave
