12v constant "hot" in the cabin???

[Rob4092xx]

I am installing a dummy flashing alarm light on my dash.

To do so, I need a constant 12v source as well as a switched 12v source.

I found the switched 12v source in the fuse box located on the driver's floor area. Only problem is none of these fuses are constantly "hot." They are all only "hot" when the ignition is on.

I need a constant 12v source so my alarm light will stop flashing once the key is on.

Helppppppp

 

[pingu81]

I know that with a lot of the older Honda's there is a constant hot at the dome light. I suggest taking the dome light out and probing it with a voltmeter. Just a thought. Otherwise check the Service Manual, there should be full schematics of the electrical system there.

 

[drew]

http://www.nsxprime.com/forums/showpost.php?p=387896&postcount=35