02 Taillight update

[Pccw]

hi
i am planning to order a set of new taillight 2002and up
what do i need to tell the parts people
which part do i need, i drive an 91, and do i just order the 3 set and i am ready to go???
or i need to purchase more parts too??? maybe bulbs, harness, do i need to get all that from them?
anyone know where to get it for a good price, and how much piece do i ned to finish the conversion???
thanks

 

[evof575gtc]

this might help you getting good prices.

http://www.nsxprime.com/forums/showthread.php?t=58249

http://www.acuraparts247.com/catlistallcomp.jsp

you just need the left and right tail lamps.

center peice is unecessary. you can just buy the A emblem and stick it on.
you can remove the "ACURA" lettering by boiling the center section in water and pry it apart. well.... do a search for the mod and it may save you a few hundred bucks.

 

[Jin1976]

Very importantly new rubber gaskets for the taillights if you don't want water to get into them. Old ones need to be replaced anyway (never use them back).

BTW, the centre piece need not be replaced unless you want a Honda badge in place of Acura.

 

[djdrock]

Very importantly new rubber gaskets for the taillights if you don't want water to get into them. Old ones need to be replaced anyway (never use them back).

True! Very true. I just installed my clearcorners.com LED conversion with the new lights I bought from acura, and I could not believe how flat the gasket was. Flat as a fritter! :biggrin: As a matter of fact, I thought something was wrong at first installing the new lights because they did not want to recess at first. The screws were lose as well...

You can call Todd at Hubler Acura in Indianapolis, Indiana. This is where I got mine, and several others have commented that he has given them better than internet prices. Just mention that David referred you from NSXPrime.

 

[Pccw]

what did u got from clearcorners??
i heard clearcorners is very expensive!!
but do they look nice

 

[760NSX]

True! Very true. I just installed my clearcorners.com LED conversion with the new lights I bought from acura, and I could not believe how flat the gasket was. Flat as a fritter! :biggrin: As a matter of fact, I thought something was wrong at first installing the new lights because they did not want to recess at first. The screws were lose as well...

You can call Todd at Hubler Acura in Indianapolis, Indiana. This is where I got mine, and several others have commented that he has given them better than internet prices. Just mention that David referred you from NSXPrime.

PICS PICS PICS

 

[djdrock]

I did the 91+ LED conversion. It also has the optional illuminated center panel, which I can unplug if I choose.

I will be taking pictures soon. The weather after dark here in Indiana has been frigid to say the least. Because taking pictures of lighting, especially LEDs is tricky, I will be probably 15 minutes to get a few pics that turn out good. :biggrin: