02 Sensor part #

[gar123]

Hi, I seem to be having some problem regarding trying to buy the right 02 sensors. The part # I have tried to buy is 36531 PBY J01 and 36532 PBY J01 I'm installing 1997 headers on 1991 NSX with 3.0 engine. I'm just installing the header with my cats and exhaust. I guess there are 4 02 sensors for the 1997 and above NSX. Which ones are the ones for the header only? The person I was dealing with was asking right front and right rear, or left front and left rear. Which is which? Those of you that know, please chime in. Thanks,
GAR123

 

[spider2k]

so why no use the 2 you already have ? yours are in the headers and the new ones are also in the headers. the newer car had them AFTER the cats as well. those you dont have or need.

also arent there some adapters necessary for swapping the newer headers into the older system?

http://www.scienceofspeed.com/produ...s/NSX/ScienceofSpeed/factory_header_adaptors/

 

[gar123]

I couldn't remove the 02 sensors so I had to use a sawzall to cut them off just to get the tins off so I can get to the manifold bolts on the manifold closest to the firewall. I was trying to save them and just splice some wires if I need them longer. I'm trying to get the 02 sensors from ebay but I think the sales people does not know much about length or type, just what they see on their monitors.

Yes I know about the adapters that SOS sells, I decided to go a different route.

GAR123

 

[Larry Bastanza]

Why would I answer this again for you?

http://www.nsxprime.com/forums/showthread.php?t=99249&highlight=02+sensors

LarryB