suspension

1. **SOLD** ($130) Reduced to ($100) Honda Acura Genuine NSX NA1 NA2 Trunk Lid Weatherstrip Seal 74865-SL0-003 OEM 2. ($2500) Reduce to ($1,500) HRE 19” and 18” chrome wheels and tires. Specs listed in images. Fit my ‘94 NA1 with stock brakes. 3. ($270) Reduced to $230 New Genuine Honda NSX...

For Sale: Complete OEM NA1 Honda suspension from my 1992 NSX with approximately 62k miles, in good condition (been in storage for a few years). Part #s are visible (except for one of the rear struts), Top hats are included, and all mounting bolts are in good condition. Must sell - Asking...

Selling a set of brand new JRZ RS One coilovers. Spec'd with 800F/700R lbs/in Eibach springs with spherical top hats. Waited 4 months for these but now selling because I went with a different setup (Ohlins - call me insane ). Asking $3800 shipped, or $3600 local pickup in the Bay Area, CA.

Garage/Moving Sale! No interest in moving these. All parts in Boulder, CO off a '92. Does not include shipping. Pics below in the following order: AEM Series 1 EMS - $150 SOLD Driving Ambition Dual Pass Radiator w/Spal fan - $150 SOLD Dali Straight Pipes - $30 SOLD Big Brake Kit Spare...

Garage/Moving Sale, no desire to move them! All parts in Boulder, CO from a '92; Prices shown do not include shipping. Pics attached in the following order: Rear Rotors (2) - $100 Exhaust Manifolds w/Shields (front and rear) - $350 Rear Brake Calipers (2) - 400 (sorry no photo, can get one...

Is anybody riding on airbags? I looked into the ilift but riding fully Pressurized is not recommended. The streets where I live aren't the greatest so I need to be riding at a higher stance. The previous owner lowered the car 2 in with h&r Springs. I know it's not going to look as good if I lift...

Hi all, Has anyone tried the combination in the title? If so, would you please share your insights and what you thought of it? Currently trying to find OEM springs to un-lower my 92 and wondering if anyone has tried using OEMs from later years on the early cars. Looking mainly to get back to a...

Selling my Dali 1” front & rear sway bars that have served me well and are no longer available. They made a huge difference in how planted the car was and how much greater the feel and precision was from steering input! Only parting with these because I’ve finally installed my Liftnot bladed...

In the market for a driver side Front Compliance pivot assembly. also the left side lower arm. Any help greatly appreciated

Hello Prime - I am selling my JRZ RS coilovers. These are an outstanding setup (as is well-evidenced by many on the forum), but I’ve got two sets of suspension and am not using these. Shocks: JRZ RS Two Top Mounts: JRZ spherical pillow-ball Springs: Hyperco 550/450 w/ helper springs Location...

Greetings, So Im basically using the hibernation period (the next six months or so) as an 'improvement' period for the NSX. I purchased it last month. The current shock/strut setup (wheels are also stock) is from the factory and the car has over 100k miles. Time to upgrade. Im looking to...

I have a new set of JRZ RS coilovers. Some history... I met Jon Martin many years ago. I had heard of JRZ but I thought that the price-point was out of this world ridiculous and couldn't justify the expense. Then, one day after a meet in HB, we went for some wings in Costa Mesa. He gave me the...

In search of used good condition front left lower arm. Trying to solve a nagging suspension issue. Have a right lower to trade if you need.

SOLD I am selling my Tein Type Flex coilovers as I’ve gone to a different setup. These come with the Tein top mounts as well. The suspension is in great condition and worked perfectly with no issues when I had Ramon at Niguel Motors remove it from the car. I will also include the EDFC wiring...

I still can't quite believe it, but I just picked up my '96 NSX. However, living in San Francisco, I can believe that I've already (lightly) bottomed the plastic lip. The iLIFT suspension kit is in my immediate future, so I was wondering if anyone could recommend a good suspension shop for the...

I have a set of Bilstein NSX shocks that are NEW IN BOX. I was planning on using these at one point but went another direction instead. The part numbers are: 24-016636 (two of these) - Per receipt "replaces F4.B46.1663.H0" 24-016650 (two of these) - Per receipt "replaces F4.B46.1665.H0" Paid...

Has been a KW dealer for 15 years!!! LAST DAY TO BUY!!! SEPT. 1st - SEPT. 30th *ONLY!!!! On top of our regular Summer Sale!! (Click Picture below for rebate form) KW V1's *($100 Rebate!!) KW V2's *($125 Rebate!!!) KW V3's *($150 Rebate!!!) KW Clubsports...

Hello to all, I am getting started on giving my car some much needed attention and looking for advice on the best, cost effective, place/ or places to get the work done in the Seattle area. I have a stock 96 NSX-T, and am working on a few items to get it back to its "prime". A few initial...

BC Racing Coilovers with Swift Springs in excellent condition with around 1000 miles on them. Swift spring upgrade with 8k/10k rates. Comes with spanner wrenches and still have original instructions. I purchased for $1225.00 new. Car is going back to stock, so I'm asking $900 OBO plus shipping...

Near brand new JRZ RS w top mount. About 500 street miles. Double adjustable rebound and bound. Hyperco Spring rates are 450 and 550 with helper springs. It comes w JRZ monoball top plates. New set w top plates are over $4500 plus cost of springs and helpers. This is a fantastic deal for...

Selling set of 4 (2 front and 2 rear) Bilstein shocks with Dali springs and OEM top hats. I pulled this setup off my car to swap them for BC Racing coilovers because I wanted height adjustability. The kit has ~18000 miles on it. Performed perfectly when they were taken off of the my NSX...

CALL FOR PRICING!!! Thanks in advance, Luke 1-800-959-0145 ext 104 lpawlik@thmotorsports.com AIM: lpawlik@thmotorsports.com www.thmotorsports.com

Selling tein RA, 4 dampers with spings complete, in good condition. For NA1 and NA2. Calling 900$ excl. shipping manfred.nothstein@web.de Germany Schorndorf near Stuttgart

The iLIFT® system is the most advanced, robust lift system on the market, with the unique capability to operate automatically, without the need for a driver to press a button to raise their vehicle. Eliminates vehicle damage from scraping on speed bumps, steep driveways, or other road...

About a year ago we started working on OEM replacement front ball joints for the NSX. Since the new parts are no longer available or very scarce, we needed some options for many of the NSX's we service in our area. Originally, our idea we to make a matched version of the original. Once we took...