Search results

Is this still available?

Thanks for the responses, everyone. Forgot to check this thread. RYU that looks like a neat design. Looking forward to hearing clips of it.

Honcho I posted this in the wrong section. Can you please help me move it to the wanted parts sub forum? Thank you.

Hi all, Hope everyone is enjoying the holidays with their family thus far. I am currently looking for a jdm titanium exhaust for my 91 nsx. Please let me know if you are interested in selling. Thank you and have a happy new year to you and your family. Warm regards, Andrew

Right now I have no desire to sell my nsx, but instead have the desire to mod it. Also Honda just announced their interest in starting a nsx restoration program and remanufacturing and improving some of the parts for first gen nsxs at PMC :). Although, I’m not going to hold my breath but at...

I bought my oem set from Amayama. it’s discontinued in North America but you can still buy it at the above source. They’re located in Japan.

Beautiful shots. So clean that some look like diecast models!

Good work on the diligent engine work. I also have a similar thought on trying to simplify things on this car. Mainly to lose weight (reduce wear and tear) and ease maintenance (less components obstructing). Currently considering removing my SRS unit since my srs light is on and I have a feeling...

Welcome to the forum! I have provided my response in red in the quote. Asides from the body work and collision check, I have come to learn that the following items need attention on early NSXs if they have NEVER been replaced. Check the list below for items that have been taken care of and...

Next was cleaning. They cleaned up pretty nicely. Still dripping water. These cleaned up nicely, too!

The center piece had to be removed first. This piece also has four small gaskets on each of the studs. Left side out. The existing gaskets were caked onto the housing so I had to rip them off in pieces. Dead spider and a hairline crack on the housing. Signs of water coming through...

My taillights had water in them that wasn't noticed until a few months after I had owned the car and my trunk had a musty smell. I suspected the taillight gaskets must have failed from age. So I ordered a set of aftermarket DMT taillight gaskets from Ebay as recommended by many members. The...

Keep in mind everything thus far had already taken place in 2017 since I am slow on updating my journal. Have been too lazy with my updates since I have to transfer the pictures from my phone to computer to google photos to nsxprime. Anyhow, continuing with July of 2017 - I attended my first...

Hey @MotorMouth93. When you have time, can you create a detailed guide on how to rebuild the calipers? I have been doing some reading but haven't found enough information to confidently help me tackle this. Thanks! EDIT: did some research according to your post about it being similar to other...

I bought an adapter kit on sale from a local hardware store (Canadian Tires). It comes with several fittings and I just hook it up to my compressor.

Read something similar about the early 09-10 R8s cracking their frames, and wow at $8k USD for AC compressor replacement on the V8s since the engine has to come out. The GT4 and R8 V8 are on my radar for the next change from the NSX, but having second thoughts now...

A number of weeks after I had replaced the battery, my battery died again. Reason being that I didn't touch the car for 3-4 weeks and also accidentally left the dome light turned on. I decided I wanted to go with an AGM (Absorbent Glass Mat) battery since I read that it is better than...

My car came with the OEM fat-fives when I bought it, so I decided to install them and try to sell off the aftermarket Fikse wheels that were installed. I also wanted to experience what Honda had intended with the OEM wheels. I had stored these wheels away in my basement when I got the car and...

No wonder! I'll let it sit longer this season when I recondition the leather again. Might even do it a second time before storage this year, so it can settle in during the cold winter months.

Amazing work as usual! What thread locker did you use? What's your thought on some people welding the fasteners to prevent them from coming loose?

I replicated what I did with the door inserts on the steering wheel. This is the before - notice the worn out leather between the 6 o'clock and 9 o'clock section. The steering wheel was pretty dirty as expected... Applying the conditioner: After waiting 20+ hours again and wiping off...

While I was browsing the forums, I came across a thread in the detailing section about leather treatments (Link: Best leather treatment I ve ever used!!). The amazing results in that thread reminded me of how much I neglected the leather bits in my interior. I scrolled through the thread and...

Thanks, Lamini!I agree 100% that it's never as easy as it looks haha. The difficult part is allocating time to do research then performing the actual work between family, friends and multiple hobbies.

Next I ordered and replaced the air cleaner (air filter). I was told by my Honda dealership that this was the last remaining unit in Canada and it was shipped from Vancouver city. I referred to the 1991 service manual to access the air cleaner. It was fairly straight forward. After I...

Next I ordered six oem NGK PFR6G-11 sparkplugs from Nissan as they were cheaper than to buy from Honda.