Search results

Anybody with the body supplement to the WSM can tell me what's the part number for the rear subframe alignment pins? I think it is 070AG-SJAA10S but I'd rather be sure.

My 1991 had its first clutch change last year at 92K miles. Although it didn't slip, a slight vibration at the bite point in first gear was diagnosed as a worn flywheel, and frequent resistance in getting the shift lever out of gear was a sign of clutch trouble to come. The time was right to go...

Looking for intermediate shaft, mostly interested in 2 support pieces in good shape, but will take whole assembly. Thanks!

Anybody knows the difference between the NA1 and NA2 brake boosters? I see different numbers for 91-96 and 97-05 (cutoff is not 2000 so I assume ABS is not part of the equation). NA1 booster: 46400SL0951NA2 booster: 46400SL0J02

Does anyone know whether the different versions of the Comptech headers for 3.0 and 3.2 are different designs or the 3.0 application is the same as the 3.2 + extensions? If so, are these extensions still available? I can't seem to find info on the CT engineering website. Thanks,

Nissan and now Toyota are putting some parts back into production for its older Skyline and Supra models, any indication that Honda intends to do the same or, at least, maintain its current offer of available parts? It is a concern of mine that our cars will become more and more difficult to...

SOLVED: Chasing strange whine This is sort of a repost which I had initially suspected to be associated with VVIS, a strange whine or drone noise coming from the engine bay at idle (even the slightest increase in RPM kills it) when the engine has been fully warmed up (sound clip is posted...

My car developed a strange and fairly loud drone like noise at idle after the major 90,000 mile service (which did not include pulling the VVIS assembly to inspect screws, I found out only recently that it was an area of concern), the mechanic who performed the work inspected the alternator and...

While restoring my problematic ALB/ABS module, I noticed that there are areas with paint missing on the inner rail where the unit bolts on to. I figured that the module leaked slightly resulting in brake fluid running down the rail, a few spots of paint are missing. Question is, any harm in...

Looking for ABS accumulator in good shape (membrane intact and charged).

As I'm renovating some systems inside the car, I noticed that many of the parts I removed had foam padding that deteriorated over time (glovebox, speakers, etc), what product is out there that could best replace the worn out material?

After a hard braking that triggered my ALB on crappy tires last year, my ALB pump started cycling every 10 seconds or so. I quickly removed the relay to stop the pig squeal going down the road. I then ordered a clever kit to exercise the solenoids, did multiple runs of tests and all 4 solenoids...

Anybody knows whether the OEM 16/17 wheels were identical over the years 94-01, aside from paint/finish, in terms of material and shape?

Looking for single front OEM 16" wheel to be refinished, must be straight and usable. Thanks.

I recently purchased a nice set of 97-01 wheels in the machined finish. While they are in good shape with no damage, the clear coat is peeling off at some places. Is it possible to have those refurbished without losing the machined finish? I see that some sophisticated methods put the wheels...

Hi primers! My 92,000 mile 1991 has potential clutch issues. I've owned the car for over 2 years now and noticed very early on that clutch pickup was very harsh and crude, not at all progressive as I would expect after driving other NSX cars. I asked two trained technicians to drive the car and...

I have put around 1000 miles on my 91 NSX since I bought it earlier this year and I noticed that the rev limiter kicks in systematically at 7,800rpm (could be 7,900 but surely never touches 8,000). The engine speed always seemed more than fast enough to my ears so I never bothered to enquire, I...

Seeking updated tips on tires for my newly found OEM 16/17" wheels. Being a bit of a purist, I was upset to find out the correct RE010 tires were no longer available. The car will not be used on the track. It is my occasional weekend driver though it gets used as it's intended wherever roads...

Doing a coolant flush on my 91 as preventative maintenance. Mechanic says the original green stuff would be safer but Honda dealer doesn't carry it anymore; didn't check with Acura yet. What's the consensus on this? I flushed coolant on my Honda VFR800 last year and found the Honda green...

Looking for working (or not) radiator fan control unit. To be used or rebuilt.

Looking for a nice set of 97-01 (blades silver) OEM 16/17 wheels in stock finish. Thanks.

Exhaust tips on otherwise stock exhaust is a subject that's not been discussed often. I wish to keep the stock muffler on my 91 and change the tips. I saw these great looking tips on a 2000 NSX-T that has a stock muffler, I assume they are aftermarket? Can anyone recognize these tips?

New owner here in Montréal! After well over 2 years of search, I found the right car, a 1991 with flawless history and mint condition. The car is originally from New Jersey and was imported into Canada in 2004, it's been in the same caring hands since then, with complete service history from the...

What are your thoughts on the extreme increase in prices of air cooled 911s? For those who haven't followed, we aren't talking 20-30% appreciation, more like 50-100% increase over a 2-3 year period and continuing. Granted some of that must be due to market recovery from the 2008+ slowdown, but...

This could be a nice project car for a DIYer on the West coast. Needs transmission, clutch, TB/WP, and a few other mechanical issues fixed. Kijiji 1012421612 or on autotrader.