ScienceofSpeed has developed a new innovative sliding seat rail kit that allows side-mount aftermarket seats to be installed in the NSX. Previously, only narrow seats could be installed into the NSX on sliding rails. These new seat rails allow both wider seats such as the Recaro Pole Position as well as narrower seats such as the Recaro SPG and Sparco REV to be installed.
The Recaro Pole Position is very similar to the Recaro seat used by Honda in the NSX-R and Type-S versions of the NSX in Japan. This seat is now available in black leather in addition to black, red, and blue fabric. The center cushions can be customized in different colors to replicate the NSX-R and Type-S seats. This seat is perhaps one of the most comfortable bucket type seats, and allows larger sized people to fit comfortably in a seat that allows much more support than the factory seat. These rails allow near-carpet level positioning of the seat bottom for maximum headroom clearance.
Anyone attending NSXPO is welcome to view the seats in our car.
After using other rails for several years, our goals in developing the seat rails were as follows:
1. better design - more versatile for larger seats to be installed, easier sliding operation
2. better quality - durable powdercoat finish, ball bearing sliders
3. decreased weight (decreased to 14.2lbs vs. 16.0lbs)
4. ease of installation - no slotting or drilling required for installation, no cutting of factory seat belt retainer required, all-metric better quality hardware used
We were able to accomplish these objectives, however, the more complex design results in a $25.00 difference from existing sliding rails. The quality is far superior with a more durable finish and easy sliding rails. The rails are more complex (each one consists of over 50 pieces) but have a design which allows much easier installation and operation. We are offering a pre-order discount of $40.00 when the rails are purchased as a pair before the ship date (Oct. 15th).
thank you,
-- Chris
http://www.scienceofspeed.com/produ...oducts/NSX/ScienceofSpeed/sliding_seat_rails/
Recaro Pole Position (black leather):
ScienceofSpeed Sliding Seat Rail:
The Recaro Pole Position is very similar to the Recaro seat used by Honda in the NSX-R and Type-S versions of the NSX in Japan. This seat is now available in black leather in addition to black, red, and blue fabric. The center cushions can be customized in different colors to replicate the NSX-R and Type-S seats. This seat is perhaps one of the most comfortable bucket type seats, and allows larger sized people to fit comfortably in a seat that allows much more support than the factory seat. These rails allow near-carpet level positioning of the seat bottom for maximum headroom clearance.
Anyone attending NSXPO is welcome to view the seats in our car.
After using other rails for several years, our goals in developing the seat rails were as follows:
1. better design - more versatile for larger seats to be installed, easier sliding operation
2. better quality - durable powdercoat finish, ball bearing sliders
3. decreased weight (decreased to 14.2lbs vs. 16.0lbs)
4. ease of installation - no slotting or drilling required for installation, no cutting of factory seat belt retainer required, all-metric better quality hardware used
We were able to accomplish these objectives, however, the more complex design results in a $25.00 difference from existing sliding rails. The quality is far superior with a more durable finish and easy sliding rails. The rails are more complex (each one consists of over 50 pieces) but have a design which allows much easier installation and operation. We are offering a pre-order discount of $40.00 when the rails are purchased as a pair before the ship date (Oct. 15th).
thank you,
-- Chris
http://www.scienceofspeed.com/produ...oducts/NSX/ScienceofSpeed/sliding_seat_rails/
Recaro Pole Position (black leather):
ScienceofSpeed Sliding Seat Rail: