Horn - 2 pin Connector

Joined
21 May 2008
Messages
1,324
Location
GTA
I'm trying to put in an aftermarket horn. Is there a place to source the 2 male connectors and plug into the existing plugs? It seems the "Honda" horn connectors are a different size than the ones on the NSX.

Something like this:

shhworldsea-6189-0129-2-Pin-Automotive-Cable-Horn-Wire-Connector-For-Excelle-for-BYD-for-BUICK.jpg
 
Test fit with the horn connectors with those on your transmission (AT or MT). If they fit, those connectors are on just about every Honda, mostly for solenoid control...but super common.
 
Yes, super common...just go to your local Pick a Part or get a used Honda transmission harness from eBay.

Sumitomo makes the connectors if you need to track down a spec sheet or need quantity.
 
Back
Top