The first thing Cedar Ridge Fabrication became know for was our performance focused NSX suspension upgrades. Since we are sponsoring NSXPO 2015 track day we are offering some packages of our suspension parts at a discount.
$440 Rear Beam Bearing set, regular $480 installed in your beam(or exchange)
These will allow you to reduce the rear camber by 1-1.2 degrees, depending on the ride height of your NSX. These use NHBB spherical bearings that should last about forever! MUST be used with a rigid toe link! Available with a 'zero' offset step spacer for those who have already corrected camber.
$400 Front Lower Bearing set, regular $440 installed in your beam(or exchange)
These will allow you to increase the front camber by 1-1.2 degrees, depending on the ride height of your NSX. These use NHBB spherical bearings that should last about forever! These will greatly increase steering sensitivity by removing the largest rubber bushing from the front suspension! Available with a 'zero' offset step spacer for those who have already corrected camber.
Rigid toe links
$195 standard duty, regular $215
Aurora rod ends, Aluminum hex body for easy adjustment
$390 heavy duty, regular $405
NHBB rod ends, Aluminum hex body for easy adjustment
$495 race duty, regular $525
NHBB rod ends, plated Cro-moly tubular body, the strongest and lightest
$195 Front Compliance Clamps, regular $215
The newest design clamps which remove unwanted rearward travel from the front suspension which creates stability under hard braking. These clamps can tighten up older suspension by removing any slop that can develop in the compliance system as parts wear.These offer the most tire clearance of any front compliance clamps. A great upgrade for any year!
$310 Set of 4 sway links, regular $350.
4 corner set of adjustable sway bar links which allow you to adjust for sway bar clearance and corner weight your car, the ultimate set up for any performance NSX or track monster.
$40 Set of Front sway EXTRA long spacers, $45 regular
Pair of extra long spacers, with plated bolts and lock nuts. Made from high strength aluminum and designed to allow extra adjustment for the stiffest settings on some after market sway bars.
PM if you are interested, I am offering these deal to the first 5 Prime members. I have 2 rear beams we can use for exchange if you want to have a beam sent out.
Thanks,
Dave
$440 Rear Beam Bearing set, regular $480 installed in your beam(or exchange)
These will allow you to reduce the rear camber by 1-1.2 degrees, depending on the ride height of your NSX. These use NHBB spherical bearings that should last about forever! MUST be used with a rigid toe link! Available with a 'zero' offset step spacer for those who have already corrected camber.
$400 Front Lower Bearing set, regular $440 installed in your beam(or exchange)
These will allow you to increase the front camber by 1-1.2 degrees, depending on the ride height of your NSX. These use NHBB spherical bearings that should last about forever! These will greatly increase steering sensitivity by removing the largest rubber bushing from the front suspension! Available with a 'zero' offset step spacer for those who have already corrected camber.
Rigid toe links
$195 standard duty, regular $215
Aurora rod ends, Aluminum hex body for easy adjustment
$390 heavy duty, regular $405
NHBB rod ends, Aluminum hex body for easy adjustment
$495 race duty, regular $525
NHBB rod ends, plated Cro-moly tubular body, the strongest and lightest
$195 Front Compliance Clamps, regular $215
The newest design clamps which remove unwanted rearward travel from the front suspension which creates stability under hard braking. These clamps can tighten up older suspension by removing any slop that can develop in the compliance system as parts wear.These offer the most tire clearance of any front compliance clamps. A great upgrade for any year!
$310 Set of 4 sway links, regular $350.
4 corner set of adjustable sway bar links which allow you to adjust for sway bar clearance and corner weight your car, the ultimate set up for any performance NSX or track monster.
$40 Set of Front sway EXTRA long spacers, $45 regular
Pair of extra long spacers, with plated bolts and lock nuts. Made from high strength aluminum and designed to allow extra adjustment for the stiffest settings on some after market sway bars.
PM if you are interested, I am offering these deal to the first 5 Prime members. I have 2 rear beams we can use for exchange if you want to have a beam sent out.
Thanks,
Dave
