In Sept 2012, Matthel Ma (aka Matt) owner of The Shop San Bruno, decided to replace his above ground Hunter Alignment rack with an in ground Hunter Alignment rack. One of the advantages of the in ground Hunter alignment rack is that it will accommodate almost any lowered car. Recently, I thought it would be a good idea to have an alignment done on my NSX. Some of you may know that my NSX is relatively low with KW Variant 3 coil overs and Umbrella Design front cup kit.
In spite of how low my NSX is, my NSX had no problem driving onto the alignment rack. As a side note, I did notice that the technician (Caleb) with the assistance of the other technician (Mike), took extra precautions while driving my NSX onto the alignment rack.
After mounting the devices on to all four wheels, a snap shot of what my current alignment specs were taken. Caleb, reviewed the current specs with me and provided advice on what could be done based on my requirements.
The adjustments that can be made on an NSX are typically:
1) Front and rear camber
2) Front and rear toe
3) Front caster
Below are several pics that was taken during my alignment.
Hunter Alignment Specs for stock NSX
Before
After
Caleb - Technician
Pic 1 NSX on Alignment Rack
Pic 2 NSX on Alignment Rack
I was very satisfied with the work done by the Technicians at The Shop San Bruno and I highly recommend them for alignment not only for your NSX, but for all your other cars as well.
To make an appointment you can reach Matt at (650) 624-SHOP (7467), their address is:
The Shop San Bruno
1153 San Mateo Ave
San Bruno, California 94066
The Shop San Bruno is also on Facebook, look for The Shop San Bruno
Thanks,
Mike
In spite of how low my NSX is, my NSX had no problem driving onto the alignment rack. As a side note, I did notice that the technician (Caleb) with the assistance of the other technician (Mike), took extra precautions while driving my NSX onto the alignment rack.
After mounting the devices on to all four wheels, a snap shot of what my current alignment specs were taken. Caleb, reviewed the current specs with me and provided advice on what could be done based on my requirements.
The adjustments that can be made on an NSX are typically:
1) Front and rear camber
2) Front and rear toe
3) Front caster
Below are several pics that was taken during my alignment.
Hunter Alignment Specs for stock NSX
Before
After
Caleb - Technician
Pic 1 NSX on Alignment Rack
Pic 2 NSX on Alignment Rack
I was very satisfied with the work done by the Technicians at The Shop San Bruno and I highly recommend them for alignment not only for your NSX, but for all your other cars as well.
To make an appointment you can reach Matt at (650) 624-SHOP (7467), their address is:
The Shop San Bruno
1153 San Mateo Ave
San Bruno, California 94066
The Shop San Bruno is also on Facebook, look for The Shop San Bruno
Thanks,
Mike