NSX-R Momo Steering Wheel Install

GT-N · 2 April 2013

Hi NSX Primers,

First and foremost, thank you for taking the time to read my thread. All comments and suggestions are greatly appreciated.

I hope this thread will help others. I am trying to install my NSX-R Momo Steering Wheel with NSX-R Horn Button Kit and NSX-R Momo Hub. 6 screws for the hub, and 6 screws for the wheel.

Here is a great thread on how to do the install.
http://www.nsxprime.com/forum/showt...ering-Wheel-Quick-Release-Hub?highlight=works

I just want to ask before I attempt this, is if I have all the parts needed to do the install. I believe I'm missing some jumper wires or something to disable the cruise control/SRS?

thank you

Kaz-kzukNA1 · 3 April 2013

Hi, NSXchnk.

You will need to fabricate a metal plate to establish the connection to the contact plate at the base of NSX-R/Type-R hub/boss.
Or, you need to find the similar metal plate from the breaker yard from other models.

As you will be removing the cable reel assy for the SRS/Cruise/Horn, you will need to create different circuit by jumper wires, etc.

You can find the required information in my post on NSXCB below;

http://www.nsxcb.co.uk/showthread.p...teering-wheel-with-OEM-boss&p=58209#post58209

It’s in the ‘Body’ section of my NSX Technical and Service Information Index 02.
You can find the link in my signature section as well.

Kaz

kennyc · 3 April 2013

It has been a while.. but I definitely remember that I did install a resistor jumper. I don't believe you have to do anything to the cruise control.

I have the NRG hub so my install was pretty much what the post described.

whitebois · 14 April 2013

I used that same writeup a year ago and it really helped- went smooth.

GT-N · 14 April 2013

whitebois said:
I used that same writeup a year ago and it really helped- went smooth.

Yes, my whole nsx-r steering wheel setup is now complete thanks to Kaz. What a great guy, super nice. My main problem was getting the right size DIY metal plate, so I made a second one and it was perfect.

davidf · 19 April 2013

Am I correct to think the Momo hub is designed to collapse upon impact? It sure looks that way. Just my observation.

Alas-NSX · 19 April 2013

That's correct.

GT-N · 19 April 2013

davidf said:
Am I correct to think the Momo hub is designed to collapse upon impact? It sure looks that way. Just my observation.

I don't think any front end collision with an aftermarket steering wheel would be pretty. If it didn't collapse on impact would it be safer?

MOMSPH · 19 April 2013

It's so difficult to connect the wire for the cruise control buttons to the pins since the pins are so small. I have yet to connect my cc buttons. Can someone tell me where to buy the tiny wire connectors?

g3driver · 22 April 2013

MOMSPH said:
It's so difficult to connect the wire for the cruise control buttons to the pins since the pins are so small. I have yet to connect my cc buttons. Can someone tell me where to buy the tiny wire connectors?

did you ever get the answer to your question? I have been wondering that for a long time too!

NSX-R Momo Steering Wheel Install

Similar threads