PerformancePackage™ Shift Boot Retainer Clip for 1991-2003 NSX

scorp965 · 11 January 2013

When you install an aftermarket shift knob in your NSX the OEM leather boot no longer stays flush against the new knob, exposing the shifter stalk.

We machined a batch of clips from solid aluminum, anodized black, that slide over the top of your shifter stalk and clip into the OEM leather boot, in order to keep it tight against your shift knob:

Check out the Before / After:

Available for $21.95/ea:<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="R6EBUVW4SFPHL">
<input type="image" src="https://www.paypalobjects.com/en_US/i/btn/btn_buynowCC_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>

--//--

Can also be used with NSX-R shift boots, and 2004-2005 leather boots, by sliding it under the boot:

scorp965 · 12 January 2013

Shipped a couple of these out Today, Thanks Guys :wink:

scorp965 · 3 March 2013

bump :smile:

NSX1145 · 3 March 2013

Ordered mine, works great.

Chive On · 3 March 2013

Ordered one from scorp, came within a week and words great. Thanks again,

A_J · 9 March 2013

Shipping to Norway?

scorp965 · 10 March 2013

A_J said:
Shipping to Norway?

We Ship Worldwide, Standard Airmail is $7.95 :smile:

Quix-Draw · 13 March 2013

This is a beautiful product, and exactly what I needed! Got mine yesterday... Thanks Scorp!!

scorp965 · 14 March 2013

I'd like to try placing one of these under an NA2-R Mesh Boot, or a OEM 2004-2005 boot, to see if it serves the same function.

It should act perfectly in this case, but I don't have a reason to tear my center console apart for a couple of weeks.

Mr. Fuji · 14 March 2013

I am wondering if this would work on an NSX-R boot with a spherical knob???

Pics are encouraged!

scorp965 · 29 March 2013

Mr. Fuji said:
I am wondering if this would work on an NSX-R boot with a spherical knob???

Pics are encouraged!

Just installed one of these under a 2004-2005 leather boot, which is similar to the NSX-R boot (no trim ring):

No zip tie, just our Aluminum Retainer Clip installed under the boot.

gt_nfr · 2 June 2013

Are these still available for order? If so, How?

NVM, missed the pay button!

DRIFTER · 2 June 2013

Thats a great idea! If I didn't have the SOS knob with the clips built in I would be all over this.

Hrant · 2 June 2013

Perhaps I am missing something with the first picture as offered by the OP. If the shift knob sits that high after it being screwed down, the clip will not help unless. If the shift knob was not screwed all the way down then that is a different story - needs to be disclosed.

CDX_NSX · 3 June 2013

Hrant, I believe that the first picture shows what it looks like without the clip. The knob itself appears to be screwed down, but the boot is sagging. I've actually seen this clip in action and it does the trick.

Edit: Upon closer inspection of the picture it does look like the knob isn't screwed down all the way. Still, the clip does indeed hold the boot up against the shift knob where it would otherwise be sagging.

scorp965 · 3 June 2013

Our clip bottoms out at the end of the threads, where the shift stalk starts to taper, and clips into the top of the OEM boot, holding it in place.

It can also be installed under the boot, for OEM 2004-2005 and NSX-R mesh boots, as in This Post

Hrant · 3 June 2013

CDX_NSX said:
Edit: Upon closer inspection of the picture it does look like the knob isn't screwed down all the way. Still, the clip does indeed hold the boot up against the shift knob where it would otherwise be sagging.

That's what I am saying too! :wink:

Track Addict · 3 June 2013

I received one of the first of these clips and I'll say man these things work great! My only commentary on it is that my shift knob sat really low on the stalk and would have had to sit higher than I prefer to use the ring as it came from Scorp.

I measured the stalk where the boot needed to sit for me to be happy, I massaged the hole in the clip and PRESTO! Perfect fit. Thanks Scorp

RYU · 3 June 2013

+1 on this part. Only way to finish up a nice aftermarket shift knob install. I bought one from John long ago and still have it.

cosplayerkyo · 18 June 2013

Wow this is perfect! *Ordered*

scorp965 · 26 September 2013

scorp965 · 26 October 2013

Ran across an NSX owner at a gas station with a sagging boot last week, fixed in under a minute with one of these clips.

Billet Machined from a solid cube of AL6061, for about 20 bucks.

scorp965 · 1 December 2013

WayJaded · 4 December 2013

This product is awesome...for clarification, you cannot fit this under the mesh boot. I cut the zip tie and tried to get the shift knob to fit, but it wouldn't. I had to push the lower part (that looks like it clips) through the mesh and zip tied it around the lower part. Then I screwed the shift knob on and it sits on top of the retainer, but you can't see the retainer.

devin · 4 December 2013

just placed a order.

thanks

PerformancePackage™ Shift Boot Retainer Clip for 1991-2003 NSX

Similar threads