Convert nsx diff to nsx-r

costa · 10 August 2012

found this on youtube really clear on how its done

i know im doing this for shure

lmk what u guys think
http://www.youtube.com/watch?v=tn2oF8rT6io&feature=share

nsxtreme91 · 11 August 2012

That looks easy.

mrbozo1 · 14 August 2012

costa said:
found this on youtube really clear on how its done

i know im doing this for shure

lmk what u guys think
http://www.youtube.com/watch?v=tn2oF8rT6io&feature=share

It is very easy to do if you already have your transaxle out and apart. That is the video that I posted after doing mine.

costa · 17 August 2012

mrbozo1 said:
It is very easy to do if you already have your transaxle out and apart. That is the video that I posted after doing mine.

so that is you ..hahahaha ...thanks for the info ...didnt even new that existed and easy to do

do u feal the diffrance

mrbozo1 · 17 August 2012

costa said:
so that is you ..hahahaha ...thanks for the info ...didnt even new that existed and easy to do

do u feal the diffrance

Cant really tell the difference at the dragstrip, but when I had the trans out to do new bearings I decided to do the diff as well. The car did go sideways once at 85 mph before I did the conversion, it hasn't done that since.

8400RPM · 17 August 2012

That's a great tutorial!

PHOEN$X · 17 August 2012

I've had the pleasure of meeting Mr. & Mrs. Bozo, they seem like great people!

costa · 22 August 2012

i have been trying to find at sos the part numbers to make the order and cant
i sent a e-mail at chris and no answer can someone lmk the link so i can order these
parts to covert my stock diff to nsx-r
thanks

scammy · 23 August 2012

here you go i got these about a month ago they are not expensive just have to wait until i drop the engine for all the other maintenance bits i have planned and do this then
You need one: 41581-PR8-J00 (stopper plate) (Japan part)
You need two: 41696-PR8-000 (spring plate) (all world part)

OLDMNSX · 3 September 2012

Is this mod good for ALL years differential? There was a redesign after 95 or 96 if I remember right.

Larry Bastanza · 3 September 2012

OLDMNSX said:
Is this mod good for ALL years differential? There was a redesign after 95 or 96 if I remember right.

1991-94 Only

1995 up is a very different design. It's pre-load increases as torque increases(torque sensing)

1991-94 required setting the pre-load statically(the spring plate above), for the NSX-R they increased the pre-load by quite a bit. I recall about 120 ft. lbs. vs 40ish ft. lbs.

HTH,
LarryB

Convert nsx diff to nsx-r

Similar threads