1997 Acura NSX on HRE C95

Lon@HRE · 22 December 2011

A classic of it's time, the Acura (Honda) NSX was one of the few Japanese mid-engine sports. You probably recognize Andy aka "BlueBatmobile" on the forums.

Andy selected a set of HRE C95 with Brush Tinted centers and Polished outer. His NSX uses 18"x8.5" front and 19"x10" rear. The C95 features titanium assembly bolts, some of the lightest wheels HRE offers.

Photos by Stanceworks, Mike Burroughs

rsman · 28 December 2011

Lon, pls advise as to the weight of the wheels, offsets front and rear, tire sizes used in this application and if there are any rub issues on front. Many Thx.

Blue Batmobile · 2 January 2012

18x8.5 19 lbs 31 offset tires 215/35/18
19x10 22 lbs 34 offset tires 265/30/19
no rubbing issues at all! Lon was very good getting the fitments down to a T for me

. More pics can be found here

http://nsxprime.com/forum/showthread.php?t=155389

B@t™

rsman · 3 January 2012

Are you sure about the 31 offset for the front? With an 8.5 inch front width, my guess is that the offset is actually 41 . Can you pls check and confirm? Rear offset of 34 seems and looks right.

docjohn · 3 January 2012

great looking wheels,,but why did they need a 8.5 inch wheel for a 215 tire width

NSX1145 · 17 January 2012

docjohn said:
great looking wheels,,but why did they need a 8.5 inch wheel for a 215 tire width

So the wheel can tuck the fender without rubbing on aggressive driving!:biggrin:

Blue Batmobile · 1 February 2012

Bingo

!

B@t™

Meeyatch1 · 19 February 2012

So....now I cannot stop looking at this car. How much for a set like this?

myw · 19 February 2012

i think b@t stated about 6-7k damage for these baddie wheels in a previous post.

Meeyatch1 said:
So....now I cannot stop looking at this car. How much for a set like this?

1997 Acura NSX on HRE C95

Similar threads