- Joined
- 19 March 2008
- Messages
- 398
Jh4na21674t000050 just picked it up not in my hands yet but being delivered paid a grip for it though but its okay gonna save the car, here are some pics will update them as soon as car is in my possession
2004 lbbp salvage build
- Thread starter macninja77
- Start date
shawn110975
Suspended
Macninja the only reason I didnt bid on this car was your gonna laugh is the drivers seat bottom leather was slashed with a razor.
I didnt want to have to replace the leather seats LOL
was gonna use this car to rebuild Jason's 2002. but the damn leather?? why would someone cut it with a razor made me mad seeing it.
goodluck I am sure you dont need any parts as you have a ton but PM if you need something.
I didnt want to have to replace the leather seats LOL
was gonna use this car to rebuild Jason's 2002. but the damn leather?? why would someone cut it with a razor made me mad seeing it.
goodluck I am sure you dont need any parts as you have a ton but PM if you need something.
It looks like the damage is very severe, good luck with it!
Is this NSX from IAA or Copart? How much did it go for?
The seat cushion new is about 400 
Good luck with the project, are the front rails damaged? I'm also trying to rebuild a '91 soon myself, my seats are torn wear and tear. But eitherway seats really not a big deal see http://leatherseats.com unless you want to spend the $$$ on OEM ones?
- Joined
- 19 March 2008
- Messages
- 398
really guys the seats who cares let me fix the car first lol
AHHH saving a LBBP NSX. I salute you. I wish you luck.
### subscribed!!!!
- Joined
- 19 February 2008
- Messages
- 1,532
To fill you in... I have the pass air bag, df front bumper
both front frame rails, rear clip if its hit, oem or STMPO aluminum rear bumper beam, radiator, radiator upper and lower support, passenger air bag, both q-panels...
I also can sell a set of jdm q-panels with no reflector hoels
basicaly... if you need to source this stuff... get ahold of me
[email protected]
both front frame rails, rear clip if its hit, oem or STMPO aluminum rear bumper beam, radiator, radiator upper and lower support, passenger air bag, both q-panels...
I also can sell a set of jdm q-panels with no reflector hoels
basicaly... if you need to source this stuff... get ahold of me
[email protected]
I have the oem 2005 front fenders and rear quaters in LBBP if interested... $350 per fender and $450- per quater
- Joined
- 19 March 2008
- Messages
- 398
Copart
shawn110975
Suspended
well if they took better pictures I could have figured out that the driver seat was NOT cut with a razor LOL
damn it man....
anyway it doesnt look that bad what about the back of the car any close ups of that? that was another concern of mine.
let me know I have lots of parts
congrats I know you have wanted a LBBP for a long time.
fix this beast and drive it till the wheels fall off.
Damn it. Im actually bidding on a R8 V10 hehe
damn it man....
anyway it doesnt look that bad what about the back of the car any close ups of that? that was another concern of mine.
let me know I have lots of parts
congrats I know you have wanted a LBBP for a long time.
fix this beast and drive it till the wheels fall off.
Damn it. Im actually bidding on a R8 V10 hehe
I remember this wreck; overjoyed to see someone pick up the project and get it back in shape. Good luck with the repair and thanks for sharing the photos
I admire the OP but gosh, there isn't a straight body panel on the car.
The front left suspension looks pretzled.
Good luck and Godspeed.
The front left suspension looks pretzled.
Good luck and Godspeed.
- Joined
- 19 March 2008
- Messages
- 398
the main damage is the rail and actually not to bad i will get some better pics all the electronics work fine abs pump nothing in the engine bay reaqlly got damaged everything is cosmetic plus some frame rails shawn call me 916-821-3456 i need a few thiings my little bro sold som parts of my parts car
Yep! Glad to see it getting a second lease on life. Good job! :biggrin:
- Joined
- 19 March 2008
- Messages
- 398
pics the major support measurments measured out perfect better than i thaught this gonna be an easy cut and paste should have front end all together by mid next week
Attachments
shawn110975
Suspended
for others the definition of Datum is as follows.
1. A fact or proposition used to draw a conclusion or make a decision.
2. A point, line, or surface used as a reference, as in surveying, mapping, or geology.
he has like 4 NSX's on his lot I am sure he can walk over to one of the others and measure. it doesnt look bad to me.
others might say its a great boat anchor LOL
others like me see a diamond in the rough. and how much fun it will be to rebuild it.
its like creating something with your hands and stepping back after your done and saying to your self I made this. that feeling is priceless and as close to giving birth as we men can get LOL
1. A fact or proposition used to draw a conclusion or make a decision.
2. A point, line, or surface used as a reference, as in surveying, mapping, or geology.
he has like 4 NSX's on his lot I am sure he can walk over to one of the others and measure. it doesnt look bad to me.
others might say its a great boat anchor LOL
others like me see a diamond in the rough. and how much fun it will be to rebuild it.
its like creating something with your hands and stepping back after your done and saying to your self I made this. that feeling is priceless and as close to giving birth as we men can get LOL
Last edited:
Thats great I see your moving along quickly, can't wait to see the finished product looking good so far.
@ the OP> How is this even worth repairing? Do you own a body shop or have experience doing this? In the end you have a salvage car that is not worth as much and hard to sell, inspect, insure, and register. It seems hardly worth it.
Im waiting for the V8s to come down in price. The R8 is the only car I would be willing to sell my NSX for. I want to build a twin turbo set up on one similar to the RS6 that I have.
Similar threads
