----------------------KIX's Inventory-------------------------
1 - NA1/2 POD Kit (PICTURED BELOW)
1 - NA1/2 Full Bar Kit (PICTURED BELOW)
=========================================
1 - NA1/2 GTC Kits in Assembly (End of Jan 2011)
------------------------------------------------------------------
2 - NA2 GTC Kits SOLD
Greetings!
I’m a brand new vendor here at Prime and also a fellow NSX owner and I am introducing a LED tail light kit and services. I believe I am the 3<sup>rd</sup> or 4<sup>th</sup> vendor to do this and hopefully your last ^__^
<o></o>
I’ve spent almost 3+ months with R&D and spend over $1000 to finally bring out a production kit. Now these are not your quickie LED taillights that you buy 1000+ LEDs and goto a website to calculate resistance and assemble. My kit is 100% RESISTOR FREE and I used a set of integrated circuits to control the turn signals, driving, reverse and brake lamps. The result is a system that uses power that is regulated, efficient, customizable, and most importantly, reliable.
<o></o>
Since this kit satisfies all of my objectives I feel great to offer it to you. These kits will be of the highest quality in both LEDs and materials used. Since I probably bored you with the reading material above lets look at some pictures.
<o></o>
The heart of the LEDs is a custom controller that is plug and play. It offers 100% control over brightness. Pictured is a controller that controls the Driving/Brake/Turn/Reverse lights. Each one can be dimmed or made brighter through the adjusters. With this you can have brake lights that can fry retinas or dim them to a point where you can barely see them. These controllers are modularized for easy access as well as servicing in case of failure.
Pictured is a complete GTC kit for the NA2. All that is shown here is fully functional when plugged into the NSX wiring harness. No wires need to be cut or altered. The kit is 100% plug and play and utilizes stock bulb connectors as well as MOLEX type plugs
Pictured is a complete tail light assembly. You can see the reverse light, driving/brake lamps, and turn signals have all been converted to LEDs. Each indicator light is controlled via the LED controller and can be dimmed.
<o></o>
Pictured is a back view of the taillight assembly. It shows the use of the OEM light bulb sockets to power the LEDS as well as connectors for the LED controllers.
<o></o>
That’s about it for descriptions… now some action shots:
<o></o>
<o></o>
Now, on to pricing!
NOTE:
I will be offering GTC, full bar, POD styles this time. Additional styles will be added soon or can be requested! Also, in order to bring order and control sales I will only be selling what I have in stock that is complete and ready to go. For example, if I have one kit in stock, whoever buys it gets that kit and I will NOT accept any further orders until I get another one in stock. This protects me and protects, most importantly, YOU!
For status of items in stock please see the top of this thread. I will update it with ETAs of items in stock as well as quanities on hand.
<o></o>
Package 1G- DIY - $795
- Led taillight kit GTC Style for Driver and Passenger (584 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 15 Spare LEDs (5 red 5 white 5 yellow)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
<o></o>
Package 1P- DIY - $895
- Led taillight kit Pod Style for Driver and Passenger (780 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 10 Spare LEDs (5 red 5 white)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
<o></o>
Package 1B- DIY - $935
- Led taillight kit Full Bar Style for Driver and Passenger (900 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 10 Spare LEDs (5 red 5 white)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
Optional
-$500 – Installation
-$50+ – Custom LED controllers
-$30 – Extra tail light sealant (enough to seal 4 lights!!!)
-$95 – Acura OEM Tail light gaskets (recommended!!!)
1 - NA1/2 POD Kit (PICTURED BELOW)
1 - NA1/2 Full Bar Kit (PICTURED BELOW)
=========================================
1 - NA1/2 GTC Kits in Assembly (End of Jan 2011)
------------------------------------------------------------------
2 - NA2 GTC Kits SOLD
Greetings!
I’m a brand new vendor here at Prime and also a fellow NSX owner and I am introducing a LED tail light kit and services. I believe I am the 3<sup>rd</sup> or 4<sup>th</sup> vendor to do this and hopefully your last ^__^
<o></o>
I’ve spent almost 3+ months with R&D and spend over $1000 to finally bring out a production kit. Now these are not your quickie LED taillights that you buy 1000+ LEDs and goto a website to calculate resistance and assemble. My kit is 100% RESISTOR FREE and I used a set of integrated circuits to control the turn signals, driving, reverse and brake lamps. The result is a system that uses power that is regulated, efficient, customizable, and most importantly, reliable.
<o></o>
Since this kit satisfies all of my objectives I feel great to offer it to you. These kits will be of the highest quality in both LEDs and materials used. Since I probably bored you with the reading material above lets look at some pictures.
<o></o>
The heart of the LEDs is a custom controller that is plug and play. It offers 100% control over brightness. Pictured is a controller that controls the Driving/Brake/Turn/Reverse lights. Each one can be dimmed or made brighter through the adjusters. With this you can have brake lights that can fry retinas or dim them to a point where you can barely see them. These controllers are modularized for easy access as well as servicing in case of failure.
Pictured is a complete GTC kit for the NA2. All that is shown here is fully functional when plugged into the NSX wiring harness. No wires need to be cut or altered. The kit is 100% plug and play and utilizes stock bulb connectors as well as MOLEX type plugs
Pictured is a complete tail light assembly. You can see the reverse light, driving/brake lamps, and turn signals have all been converted to LEDs. Each indicator light is controlled via the LED controller and can be dimmed.
<o></o>
Pictured is a back view of the taillight assembly. It shows the use of the OEM light bulb sockets to power the LEDS as well as connectors for the LED controllers.
<o></o>
That’s about it for descriptions… now some action shots:
<o></o>
<o></o>
Now, on to pricing!
NOTE:
I will be offering GTC, full bar, POD styles this time. Additional styles will be added soon or can be requested! Also, in order to bring order and control sales I will only be selling what I have in stock that is complete and ready to go. For example, if I have one kit in stock, whoever buys it gets that kit and I will NOT accept any further orders until I get another one in stock. This protects me and protects, most importantly, YOU!
For status of items in stock please see the top of this thread. I will update it with ETAs of items in stock as well as quanities on hand.
<o></o>
Package 1G- DIY - $795
- Led taillight kit GTC Style for Driver and Passenger (584 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 15 Spare LEDs (5 red 5 white 5 yellow)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
<o></o>
Package 1P- DIY - $895
- Led taillight kit Pod Style for Driver and Passenger (780 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 10 Spare LEDs (5 red 5 white)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
<o></o>
Package 1B- DIY - $935
- Led taillight kit Full Bar Style for Driver and Passenger (900 LEDs total)
- Combo Controller (single controller for Turn Signals, brake/driving, reverse lamp)
- Tail Light Sealant (Similar to OEM tail light sealant… non permanent and comes apart with heat)
- 10 Spare LEDs (5 red 5 white)
- Free Universal Turn Signal Flasher (must ship yours in at time of order)
<o></o>
Optional
-$500 – Installation
-$50+ – Custom LED controllers
-$30 – Extra tail light sealant (enough to seal 4 lights!!!)
-$95 – Acura OEM Tail light gaskets (recommended!!!)
Last edited: