These will function as a spare/track set until my TE37's arrive. Some really quick shots, Canon 40d with 70-200IS 2.8 L.
Advan RS on Imola Orange
- Thread starter synth19
- Start date
Offsets: 17×8 et37 (f) and 18×10 et35 (r). I used a 3mm spacer in front and 5mm in rear. This essentially changed the offsets to +34 and +30 respectively. I'm not sure if I like the tire specs. I think I'll go with a lower profile when these wear out. Thoughts?
They look very nice!!!
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
I prefer a 35/30... never had problems...
Here are a few wallpapers
http://www.jdmchicago.com/images/rs/1920x1266.jpg
http://www.jdmchicago.com/images/rs/1964x1200.jpg
Last edited:
Synth: Looks great. I used the same offset and might consider spacers on the back after seeing yours.
Really great!
Really great!
Looks Great!!
You can definitely go with a 3mm in front and 5mm in the rear. Since I'm running some negative camber, I'm going to try running 5 in front and 10 in rear and see if that works or not.
- Joined
- 21 December 2005
- Messages
- 1,215
that car is pure sex...are there any disadvantages to running spacers? I want to add spacers in the rear, but heard that its not safe...
Looks awesome Synth! Very tastefully done!
wow. that looks great.
where are your center caps??
where are your center caps??
Always looking hot.
Mr.JDMChicago, time to lose the Acura emblems
Mr.JDMChicago, time to lose the Acura emblems
Clean! Looks great!
Beautiful NSX, Beautiful Shots. Maybe one day we can take some pics with my LBBP and your IMOLA, PURE SICK!!!.
Bernie
Bernie
What's your suspension setup?
I need to order some.
Tein Flex Coiloveres, with Umbrella Auto Design VRH kit, Comptech Sways, NSX-R Chasis Bars
Always looking hot.
Mr.JDMChicago, time to lose the Acura emblems
Get your stickers?
Not really. As long as you use some quality spacers you shouldn't have any problems. I recommend hubcentric spacers and you can go up to 5mm and not have to worry about extending your studs. H&R comes with new studs but as long as you can get 6+ turns on your lugs, they are not really needed. When I install my BBK, I will probably put them on since everything will be out anyways, but not worried about it. When you go 10mm+, the spacers usually come with integrated studs. I know people that drive their car HARD (drifting, etc) with zero issues.
Looking good as usual. Not a big fan of the wheels though:tongue:
looks great :biggrin:
- Joined
- 20 November 2009
- Messages
- 61
one word: WOW!
- Joined
- 19 March 2008
- Messages
- 398
what kind of rear diffuser you have on that car and where did you get it
Downforce. They sell two, it's the more aggressive one. You can get it from downforce, science of speed, etc.
Car looks perfect. My vote would be on black for the center caps.
Similar threads
